Component Test - CHICAGO 98614 Manual

5.8 Component Test

The Component Test function allows initiating a leak test for the
vehicle's EVAP system. The scan tool itself does not perform the
leak test, but commands the vehicle's on-board computer to start
the test. Different vehicle manufacturers might have different
criteria and methods for stopping the test once it has been started.
Before starting the Component Test, refer to the vehicle service
manual for instructions to stop the test.
1) Use UP/DOWN scroll button to select Component Test from
Diagnostic Menu and press ENTER button.
2) Wait a few seconds while the scan tool validates the PID MAP.
3) From Component Test menu, use UP/DOWN scroll button to
select the test to be initiated.
Diagnostic Menu
On-Board Mon. Test
Component Test
►
Vehicle Info.
Modules Present
Unit of Measure
Component Test
Reading PID...
- Please Wait -
56
8/11
？