Obd Ii Diagnostics - CHICAGO 98614 Manual

3) Review selected data on screen.
If there is no data stored for selected item, a "Not Supported
or Stored No Data!" message shows on the screen.

5. OBD II Diagnostics

When more than one vehicle control module is detected by the
scan tool, you will be prompted to select the module where the
data may be retrieved. The most often to be selected are the
Powertrain Control Module [PCM] and Transmission Control
Module [TCM].
CAUTION: Don't connect or disconnect any test equipment with
ignition on or engine running.
1） Turn the ignition off.
2） Locate the vehicle's 16-pin Data Link Connector (DLC).
3） Plug the scan tool cable connector to the vehicle's DLC.
4） Turn the ignition on. Engine can be off or running.
Review Data
►Modules Present
$09
P0118
Engine Coolant Temperature
Sensor 1 Circuit High
24
1/1
?
1/6
Generic