Personal Safety - CHICAGO 92474 Assembly And Operating Instructions Manual

Brake bleeder & vacuum pump kit
Table of Contents

Advertisement

1.
Stay alert. Watch what you are doing, and use common sense when operat-
ing the Brake Bleeder/Vacuum Pump. Do not use the tool while tired or under
the influence of drugs, alcohol, or medication. A moment of inattention while
operating the tool may result in serious personal injury.
2.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair.
Keep your hair, clothing, and jewelry away from moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts.
3.
Do not overreach. Keep proper footing and balance at all times. Proper footing
and balance enables better control of the power tool in unexpected situations.
4.
Use safety equipment. Always wear ANSI approved safety glasses underneath a
full face safety shield. Nonskid safety shoes, hard hat, or hearing protection must
be used for appropriate conditions.
1.
Do not force the tool. Use the correct tool for your application. The correct tool
will do the job better and safer at the rate for which it is designed.
2.
Store idle tools out of reach of children and other untrained persons. Tools
are dangerous in the hands of untrained users.
3.
Maintain tools with care. Keep tools dry and clean. Properly maintained tools
are less likely to bind and are easier to control. Do not use a damaged tool. Tag
damaged tools "Do not use" until repaired.
4.
Check for misalignment or binding of moving parts, breakage of parts, and
any other condition that may affect the tool's operation. If damaged, have the
tool serviced before using. Many accidents are caused by poorly maintained
tools.
5.
Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one tool may become hazardous
when used on another tool.
1.
Tool service must be performed only by qualified repair personnel. Service or
maintenance performed by unqualified personnel could result in a risk of injury.
2.
When servicing a tool, use only identical replacement parts. Follow instruc-
tions in the "Inspection, Maintenance, And Cleaning" section of this manual.
Use of unauthorized parts or failure to follow maintenance instructions may create
a risk of injury.
SKU 92474
For technical questions, please call 1-800-444-3353.

PERSONAL SAFETY

TOOL USE AND CARE
SERVICE
PAGE 3

Advertisement

Table of Contents
loading

Table of Contents