Table of Contents
Advertisement
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep your
invoice with this manual. Write the invoice number on the inside of the front cover.
Keep the manual and invoice in a safe and dry place for future reference.
WARNING: When using tool, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this product!
1.
Avoid working alone
2.
Keep work area clean
3.
Observe work area conditions
4.
Keep children away
let them handle machines, tools, or extension cords.
5.
Store idle equipment
inhibit rust. Always lock up tools and keep out of reach of children.
6.
dress properly
moving parts. Protective, electrically nonconductive clothes and nonskid footwear
are recommended when working. Wear restrictive hair covering to contain long
hair.
7.
Use eye and ear protection
8.
do not overreach
over or across electrical cables or frames.
9.
Use the right tool for the job
to do the work of a larger industrial tool. There are certain applications for which
this tool was designed. Do not modify this tool and do not use this tool for a pur-
pose for which it was not intended.
SKU 43753
Specifications
Capacity
Maximum Opening
Hardware Tensile
Lead Screw
Lead Screw Torque
Support Arms
Support Arms Length
Compressor Type
Tool Weight
Save This Manual
Safety Warnings and Precautions
. If an accident happens, an assistant can bring help.
. Cluttered areas invite injuries.
. Children must never be allowed in the work area. Do not
. When not in use, tools must be stored in a dry location to
. Do not wear loose clothing or jewelry as they can be caught in
. Always wear ANSI approved impact safety goggles.
. Keep proper footing and balance at all times. Do not reach
. Do not attempt to force a small tool or attachment
For technical questions, please call 1-800-444-3353.
7" Coil Spring Diameter
8"
113-128 PSI, Minimum
11-3/8" L x 5/8" Diameter
15 ft-lb Minimum
3/8" Steel Flat Stock
15-1/4"
Mac-Pherson Struts Only
17-1/4 lb.
. Don't expose to rain. Keep work area well lit.
Page 2
Advertisement
Table of Contents
