Page 1
STRUT SPRING COMPRESSOR 43753 SET UP ANd OPERATING INSTRUCTIONS This automotive tool is ideal for tire, body, and specialty shops and garages, dealerships, and service stations! distributed exclusively by Harbor Freight Tools ® 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com...
There are certain applications for which this tool was designed. Do not modify this tool and do not use this tool for a pur- pose for which it was not intended. For technical questions, please call 1-800-444-3353. SKU 43753 Page 2...
Page 3
It must be under- stood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. For technical questions, please call 1-800-444-3353. SKU 43753 Page 3...
Before clamping the spring, slip the Safety Block (#19) over the Hook (#5) and Hook (#7) as a safety precaution should the strut break loose. Center Axis REV 01e, 08l For technical questions, please call 1-800-444-3353. SKU 43753 Page 4...
Page 5
First, position the top hooks over the strut spring. Use the Adjustment Screw (#6) to tighten the unit so the lower hooks fit over the spring. For technical questions, please call 1-800-444-3353. SKU 43753 Page 5...
Adjustment Screw (#6) threads are properly greased. An annual Strut Spring Compressor inspection is recommended. Only qualified service technicians should inspect this tool. If the tool is used extensively, more frequent inspections are recommended. For technical questions, please call 1-800-444-3353. SKU 43753 Page 6...
PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. REV 01e SKU 43753 For technical questions, please call 1-800-444-3353. Page 7...