scope R4D Maintenance Manual

Scope cycling

FRONT

WHEEL

SCOPE CYCLING

MAINTENANCE MANUAL

Table of Contents

Need help?

Do you have a question about the R4D and is the answer not in the manual?

Recommends regular maintenance intervals for Scope hubs based on riding conditions, including grease and bearing replacement.

Lists the specific tools required for proper installation and deinstallation of bearings using the Scope Bearing Press set.

States that maintenance procedures for R3C/R4C/R5C front hubs are the same as for R3D/R4D/R5D front hubs.

Illustrates and lists the part numbers and names for the R3C, R4C, and R5C front wheel hub components.

Illustrates and lists the part numbers and names for the R3D, R4D, and R5D front wheel hub components.

Step-by-step guide on how to remove bearings from the front wheel hub using specific tools and pressheads.

Detailed instructions for replacing bearings in the front wheel hub, including tool usage and grease application.

States that maintenance procedures for R3C/R4C/R5C rear hubs are the same as for R3D/R4D/R5D rear hubs.

Illustrates and lists the part numbers and names for the R3C, R4C, and R5C rear wheel hub components.

Illustrates and lists the part numbers and names for the R3D, R4D, and R5D rear wheel hub components.

Step-by-step instructions for removing bearings from the rear wheel hub using specific tools and pressheads.

Detailed instructions for replacing bearings in the rear wheel hub, including tool usage and grease application on drive and non-drive sides.