MAXIMATOR SPLV 2 Assembly Instructions Manual

MAXIMATOR SPLV 2 Assembly Instructions Manual

Air amplifiers

Advertisement

Assembly Instructions
for Air Amplifiers
Air Amplifiers
Revision 11.2011

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SPLV 2 and is the answer not in the manual?

Questions and answers

Summarization of Contents

Basic Information
Notes on the Assembly Instructions
Details the purpose and importance of reading the assembly instructions thoroughly for safe and correct operation.
Intended Use
Specifies that air amplifiers are designed for compressing pre-amplified air to a higher final pressure.
Warranty and Liability
Outlines conditions that preclude warranty and liability claims for damages.
Safety Instructions
General Safety Directives
Covers EC Directives and general safety rules for operating and maintaining air amplifiers safely.
Symbols and Signal Terms
Explains HAZARD, CAUTION, and NOTE symbols and their meanings for safety communication.
Basic Safety Measures
Covers general safety measures related to technical condition, operation, maintenance, and staff requirements.
Special Safety Instructions
Addresses specific safety concerns during operation and at the installation site.
Technical Description
Operation of Air Amplifiers
Explains the working principle of air amplifiers and their operational modes.
Overview of Air Amplifiers
Provides a comparison of different air amplifier models with their key characteristics.
Assembly and Putting into Service
General Assembly Instructions on site
Provides guidance on installing air amplifiers in any required position and general assembly notes.
Compressed Air System
Details the requirements for the compressed air control unit and compressed air quality.
High-Pressure System
Covers requirements for high-pressure pipes, accessories, and amplifier medium.
Putting into Service
Explains how to put air amplifiers into service, including pressure pulsations and connection options.
Servicing and Maintenance
Maintenance Information
Describes pre-treatment with grease and recommends specific grease for maintenance.
Maintenance
Provides a fault/cause/removal table for common maintenance issues.
Repair
Outlines repair procedures, emphasizes cleanliness, and directs to online resources.
Declaration of Incorporation
Appendix to Declaration of Incorporation
Lists essential health and safety requirements applied and complied with according to 2006/42/EC Annex I.

Table of Contents