Table of Contents
Advertisement
Important information:
1.This instruction is suitable for RT809H programmer.
2.In order to connect the programmer more conveniently and faster,please connect
the hardware after installing the software.
3.Please read the instruction carefully before using the programmer.
4.Please use the original USB data cable.
Software copyright
User manual copyright
RT809 series of programmers have acquired 6 China National invention patents,any unit or
individual is not allowed to copy,photograph,regenerate,translate or restore to any form of
electronic media readable by other machines,or will be investigated for legal responsibility.
Once there are some differences against this instruction caused by software upgrade please
Copyright Statement
WWW.IFIX.NET.CN
WWW.IFIX.NET.CN
This manual is subject to change without notice.
follow to the software.
Rock Group
Advertisement
Table of Contents
Related Manuals for iFix RT809F
Summarization of Contents
Introduction and System Requirements
1.1 Overview and Setup
Provides a brief overview of the RT809F programmer, its characteristics, and system requirements.
1.1.1 What is RT809F?
Explains the RT809F as a cost-effective, reliable, and fast universal programmer series.
1.1.2 Programmer Characteristics
Details the features and capabilities of the RT809F programmer, including supported OS and chip types.
1.1.4 System Requirements
Outlines the minimum system configuration needed to use the RT809F programmer.
1.1.5 Programmer External Port Instruction
Describes the external ports of the RT809F programmer, including their functions and connections.
Software Installation and Driver Configuration
2.1 Software Downloading and Installation
Guides users on how to download and install the RT809F software and associated toolchain.
2.2 Driver Installation and Setup
Explains the process of installing programmer drivers, including automatic and manual methods.
Software Interface and Operation Guide
Software Main Interface Overview
Details the main interface of the RT809F software, including menus and functions.
Third-Party Toolchain Interface
Describes the interface for third-party toolchains used with the programmer.
Chip Reading and Writing Operations
4.1 EEPROM Chips (93XX, 24XX, 25XX)
Covers reading and writing operations for EEPROM chips, including placement and type selection.
4.2 Laptop EC Chip Operations
Details operations for various laptop EC chips like KB90XX, IT85XX, and MEC1633.
4.12 S3F Series MCU Operations
Explains reading and writing procedures for S3F series Samsung Singlechip MCUs.
4.14 PIC 12F Series SCM Operations
Provides instructions for reading and writing PIC 12F Series SCMs.
4.15 LCD Board Printing Info Check
Guides on checking printing information of LCD boards using software settings.
Need help?
Do you have a question about the RT809F and is the answer not in the manual?
Questions and answers