Recording; Recording To A Usb Flash Drive; Editing; Shall Be Enabled By Trans Music Manager For Denon - Denon DP-200USB Owner's Manual

USB port
START
REC

Recording

Recording to a USB Flash Drive

1
Prepare the analog record you want to record for
playing (vpage 5 "Preparing to Play a Record").
q Place the record on the rubber mat.
w Set the record's playing speed.
e Set the record's size.
r Turn the power on.
2
Insert a USB flash drive into the USB port.
The USB indicator lights green.
b If the USB flash drive has a write protection switch, make sure
that it is in the unlocked position.
3
REC
Press .
• The Recording indicator lights red (preparing to record).
• The Recording indicator blinks red and recording starts.
REC
b The time from pressing (the recording indicator lights red) to
when recording starts (the red light blinks) varies with the USB
flash drive capacity and type. Check the time to start of recording
beforehand.
4
START
Press .
b If you are starting the record manually, use the finger lift to move
the tone arm to the position at which you want to start playing
and lower it carefully.
NOTE
• When removing the USB flash drive, gently hold the DP-200USB
with your other hand to keep it steady.
• Do not remove the USB flash drive during recording.
n To Stop Recording
REC
Press .
• The Recording indicator turns off.
The included "Trans Music Manager" can be used to delete silent
sections recorded before and after a track.
q Create a single track from the section to be deleted.
"Manual MP3 Splitter" (vBrief manual (CD-ROM) page 11)
w Delete the track created in step q.
"Deleting tracks" (vBrief manual (CD-ROM) page 28)

Editing

Shall be Enabled by Trans Music Manager
for DENON
You can use Trans Music Manager to perform the following
functions.
n File Splitter
• Auto MP3 Splitter
• Manual MP3 Splitter
n MusicID (Addition of track information)
• Track name, Artist name, Album name, etc.
• Access Gracenote ® on the internet
• Character Entry
n File deletion
Trans Music Manager is a trademark and registered trademark of
Trans Technology, Inc.
Information concerning music identification technology is offered
by Gracenote, Inc.
®
Gracenote and CDDB ® are registered trademarks of Gracenote.
About Gracenote MusicID Music Recognition
SM
Service
"Gracenote MusicID SM music recognition service" is a service offered
by Gracenote ® that is commonly known as CDDB
The service lets you automatically obtain CD titles, artist names, track
names, etc., in text format by connecting to the Gracenote
on the Internet.
Recommended System Requirements
for Using Trans Music Manager
• A personal computer running Windows 2000/Windows XP/
Windows Vista
• An HDD with a minimum of 30 MB free space
• A USB 2.0 port

Installing "Trans Music Manager"

1
Insert the included CD-ROM (Trans Music Manager)
in your PC.
The top menu screen is displayed.
b If the top menu screen is not displayed, open the CD-ROM drive
under "My Computer" and start "TMMLaunch.exe" .
2
Click on "Trans Music Manager installation".
The InstallShield Wizard screen is displayed.
3
Operate while reading the screen explanations.
Installation starts.
4
Click on "Finish".
Installation finishes.

Editing with Trans Music Manager

For details of the editing operation, refer to the "Simple User's Guide"
which is included on the CD-ROM supplied with the DP-200USB.
ENGLISH
® .
® server