Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for CellarCool cx8800
Summarization of Contents
INTRODUCTION
Customer Service and Manual Usage
Provides contact info and guides on using the manual for system maintenance.
Cooling Unit Functionality
Defines the unit's purpose and explains its operational mechanism.
Temperature Setting and Cooling
Details the acceptable temperature range for wine aging and cooling capability.
BEFORE YOU START
Unit Inspection and Handling
Guidelines for checking the unit for damage upon receiving it.
Installation Requirements
Specifies voltage, circuit needs, and drain line installation.
Professional Installation Advice
Advises hiring a professional for wine cellar construction.
Warranty Voiding Warning
Warns against unauthorized repairs that will void the warranty.
RECEIVING AND INSPECTING THE UNIT
Lifting and Packaging Inspection
Guidelines for safely handling the unit and inspecting packaging for damage.
Accessory Kit Contents Overview
Lists the components included in accessory kits for different models.
Electrical Outlet and Initial Testing Procedures
Recommendations for electrical connections and initial unit testing.
UNIT SPECIFICATIONS
Model Specific Specifications
Details dimensions, weight, power, and warranty for CX models.
Unit Sizing and Room Considerations
Explains factors affecting unit capacity and potential warranty issues.
PREPARING THE WINE CELLAR
Wall and Ceiling Framing Guidelines
Guidance on building wine cellar walls for optimal temperature consistency.
Insulation Requirements for Cellars
Stresses the importance of insulation and recommended R-values.
Optimal Unit Mounting Position
Advises on mounting the unit high for effective cooling and airflow.
CELLAR PREPARATION DETAILS
Ventilation and Airflow Management
Explains heat dissipation needs and maintaining unobstructed airflow.
Vapor Barrier and Door Seal
Details vapor barrier installation and importance of a proper door seal.
Ambient Temperature Considerations
Discusses the effect of ambient temperature on the unit's cooling capacity.
AIRFLOW CONTROL
Using Magnetic Airflow Deflectors
Explains how to use magnetic deflectors for optimal airflow direction.
PREPARING THE INSTALLATION LOCATION
Required Tools and Location Marking
Lists necessary tools and describes how to mark the installation opening.
Cutting the Wall Opening
Provides instructions for cutting the wall opening for the unit.
Framing the Installation Opening
Details how to frame the cut opening for structural support.
PREPARING THE UNIT FOR INSTALLATION
Mounting Flange Attachment
Describes the two-piece mounting flanges that attach to the unit.
Applying Insulation Foam Tape
Instructions for applying insulation foam tape for sealing.
INSTALLING THE UNIT
Sliding Unit into Wall Opening
Guides on inserting the unit into the prepared wall opening.
Decorative Moulding Installation Note
Advises on attaching moulding without hindering servicing.
Mounting Bracket Placement and Fastening
Details on selecting bracket location and fastening.
Securing Brackets to Wall Studs
Instructions for attaching mounting brackets to wall studs.
Sealing Unit Gaps and Cracks
Steps for sealing unit gaps with foam tape and sealant.
DRAIN LINE MANAGEMENT
Attaching the Condensation Drain Line
Step-by-step guide to connecting the condensation drain line.
Drain Line Cleaning and Maintenance
Procedures for cleaning the drain line and drip tray.
Preventing Drain Line Submersion
Warns against submerging the drain line to prevent mold.
SYSTEM OPERATION AND FEATURES
Initial Start-Up and APST
Outlines first power-up steps and APST fan control technology.
Temperature Setting and Cooling
Details how to set temperature and how cooling cycle operates.
Safety, Defrost, and Probe Failure
Explains compressor protection, defrost cycle, and probe failure handling.
Display Indicators
Describes what is shown on the unit's display panel.
CONTROLLER FUNCTIONS AND SYMBOLS
Controller Button Operations
Explains the function of each button on the controller interface.
Controller Symbol Meanings
Defines the meaning of symbols like snowflake, alarm, temperature units.
ALARM CODES AND SETTINGS
Alarm Messages, Causes, and Solutions
Lists common error messages, their causes, and recommended solutions.
CPSM (CUSTOMER PREFERENCE SELECTION MODE)
CPSM Parameter Customization
Details available settings for customizing unit behavior and calibration.
TROUBLESHOOTING GUIDE
Ice Formation and Power Issues
Troubleshoots evaporator ice and unit power or operation problems.
Temperature and Cooling Problems
Addresses cellar temperature, cooling effectiveness, and fan/compressor issues.
Compressor and Humidity Issues
Resolves compressor cycling and high cellar humidity problems.
MAINTENANCE SCHEDULE
Monthly Maintenance Checks
Outlines routine checks to be performed monthly for proper operation.
Six-Week Maintenance Tasks
Details tasks required every six weeks, including drain line cleaning.
Quarterly Coil Cleaning
Specifies cleaning procedures for the unit's coils using a vacuum.
Annual Inspections and Treatments
Lists annual inspections and drain line treatment with bleach solution.
TECHNICAL ASSISTANCE AND ACCESSORIES
Contacting CellarCool Support
Provides customer service hours, address, and contact methods.
Effective Technical Assistance Procedures
Explains how customer service assists with technical queries.
ACCESSORIES FOR COOLING UNITS
Condensate Pump Kit Functionality
Describes the function and benefits of the condensate pump kit.
PRODUCT TERMS AND CONDITIONS
Acceptance of Purchase Terms
States that purchasing the system implies acceptance of terms and conditions.
Two-Year Limited Product Warranty
Outlines the terms of the limited warranty for parts and labor.
Five-Year Compressor Warranty
Details the warranty coverage for the compressor unit.
Warranty Limitations and Exclusions List
Lists conditions and damages not covered by the warranty.
Conditions That Void the Warranty
Specifies actions that will void the limited warranty.
Product Installation Requirements Adherence
Emphasizes the importance of following installation guidelines.
User's Maintenance Responsibilities
Outlines the user's responsibility for cleaning and maintenance.
Additional End User Costs and Responsibilities
Lists costs and duties not covered by warranty.
Sales and Use Tax Policy
Explains CellarCool's policy on collecting sales tax.
Customer Service Operating Hours
Provides customer service hours and contact location.
Miscellaneous Terms Overview
Covers return policy, security interest, governing law, and errors.
QUESTIONS AND TECHNICAL ASSISTANCE
Obtaining Additional Information
Directs users on how to ask questions and get more information.
Effective Technical Assistance Procedures
Explains how customer service assists with technical queries.
Need help?
Do you have a question about the cx8800 and is the answer not in the manual?
Questions and answers