2. Equipment connection and network setting
2. Equipment connection and network setting
2.1 Required equipment preparation
The following equipments are required to connect the projector to your PC through
the network.
PC : 1) equipped with the network feature
2) installed a web browser software (11)
LAN cable : CAT-5 or greater
NOTE
• The system for using the network function of the projector requires
communication environment conforming 100Base-TX or 10Base-T.
• The network communication control is disabled while the projector is in
standby mode if the STANDBY MODE item is set to SAVING. Please connect
the network communication to the projector after setting the STANDBY MODE
to NORMAL (SETUP Menu in the User's Manual (detailed) – Operating
Guide).
4