HP Mp3130 - Digital Projector XGA DLP User Manual page 58

Fixing the System
If the projector stops showing your network presentation:
If PowerPoint features do not work in a presentation from a handheld:
If the mouse buttons on the remote control do not work:
58
❏
In Wireless Presenter-to-Go, if you selected the advanced option
to use the projector as an extended desktop, you must open
Display Properties on your computer, go to the Settings tab, and
set display 2 to extend the Windows desktop. The next time you
connect to the projector, no windows are initially shown on the
projector. To display a window on the projector, you must drag
the window onto the projector area of your desktop.
❏
If the displayed colors are distorted, be sure your computer is
using 24- or 32-bit color. Check this in Control Panel Display
on the Settings tab.
❏
If you are using a wireless connection, the signal strength might
have dropped too low and interrupted your connection.
❏
If you are in a session with a moderator, the moderator might
have stopped your presentation.
❏
Another user might have connected to the projector and taken
control of the projector. You can prevent this by selecting a
different access option in the Wireless Presenter-to-Go window.
❏
If you are using a Palm device, animations and transitions are not
supported.
❏
If you are using a Pocket PC device and want to include
animations and transitions, be sure you select the animation
option when you create the presentation on your computer.
❏
If you are using a computer, select the option in Wireless
Presenter-to-Go to use the projector remote control.
User's Guide