To Manage The Projector Using The On-Screen Menu - HP Mp3130 - Digital Projector XGA DLP User Manual

Maintaining the System

To manage the projector using the on-screen menu

The projector's on-screen menu is described in detail in the projector manual.
However, when you install an attachment module, certain new menu entries are
displayed in the on-screen menu.
New menu entries with module installed
Quick choice
Wireless Presenter
Input
Attachment module
Setup
Network
Wireless reset
Help
About the network
48
Displays information needed by Wireless
Presenter-to-Go so it can connect to the projector.
Shows the input signal from the current wired or
wireless presenter.
Sets up TCP/IP settings for the wired network port.
If the network uses a DHCP server, you must set
only the DHCP option. Check with the network
administrator.
Resets all wireless network settings to default values
(only for certain firmware versions).
Displays the current configuration of the wired and
wireless network ports on the attachment module.
The wireless configuration and certain wired
settings must be changed using the Web interface.
See "To manage the projector from the Web" on
page 49.
User's Guide