Advertisement
Table of Contents
- 1 Table of Contents
- 2 Pro-C Controller
- 3 Product Overview
- 4 Product Features and Benefits
- 5 Product Comparisons
- 6 Technical Information
- 7 Product Explanation
- 8 Installation
- 9 Programming
- 10 Troubleshooting Guide
- 11 Product Overview
- 12 Product Features and Benefits
- 13 Installation and Programming
- 14 Technical Information
- Download this manual
Advertisement
Table of Contents
Related Manuals for Hunter PCM-300
Summarization of Contents
Pro-C Controller Product Overview
Product Overview
Introduction to the Pro-C controller family, highlighting key features and benefits for users and contractors.
Pro-C Controller Features and Benefits
Outdoor or Indoor Models Available
Controller offered in indoor and outdoor versions, suitable for various installation environments.
Modular Design Concept
One controller design accommodates multiple station needs, simplifying inventory for contractors.
Easy Inventory Management
Streamlines stock by requiring only one controller model and plug-in modules for various station counts.
Modular Design Eliminates Service Hassles
Facilitates easy repair by allowing quick removal and replacement of damaged modules.
Future Expansion Capability
Controller supports adding stations via modules, accommodating future landscape expansions.
Large LCD Display
Features a large, easy-to-read display for clear visibility and simplified programming.
Pro-C Controller Key Features
Non-volatile Memory
Retains all programs indefinitely without a battery, ensuring data retention during power outages.
No Battery Required for Timekeeping
Controller accurately tracks time for up to four weeks without a battery after AC power loss.
Self-Diagnostic Electronic Short Circuit Protection
Automatically skips shorted stations, identifying problems without system shutdown.
Pro-C Controller Programming Features
Intuitive Dial Programming
Step-by-step programming using a dial and simple buttons, offering ease of use.
Removable Front Panel for Remote Programming
Allows programming away from the controller, useful for setup and homeowner interaction.
Multiple Programs and Start Times
Supports three independent programs with up to four start times each for diverse watering needs.
Up to Six-hour Station Run Times
Allows station run times up to six hours, programmable in one-minute increments.
Choice of Independent Day Scheduling Options
Offers custom, interval, odd, or even day scheduling for each program independently.
Pro-C Controller Advanced Functionality
365-day Calendar with Leap Year Intelligence
Supports odd/even day watering and automatically corrects for leap years and month lengths.
Superior Surge Protection
Equipped with MOVs to shunt electrical surges, protecting microcircuits from lightning strikes.
Global Water Budget/Seasonal Adjustment
Allows global adjustment of run times (10-150%) without reprogramming, for weather changes.
Pro-C Controller Connectivity and Control Features
Weather Sensor Compatible
Allows easy connection of rain/weather sensors with a bypass switch for maintenance.
Programmable Event Day(s) Off
Inhibits watering on specific days, useful for mowing or events, overriding interval schedules.
One Touch Manual Start and Rapid Advance
Simplifies manual station activation and inspection with fewer steps.
Remote Ready Capability
Compatible with SRR and ICR remote controls for convenient remote operation.
Pro-C Controller Durability and Delay Features
Heavy-Duty Cabinet Construction
Robust UL listed, NEMA 3R rated cabinet resists UV degradation and features a key lock.
Programmable 0-7 Day Rain Delay
Allows setting a rain delay for 1-7 days, automatically resuming watering afterward.
Programmable Delay Between Stations
Inserts a delay between station operations for slow valves or well recovery issues.
Pro-C Controller System Integration and Options
Pump Start/MV Circuit, Programmable By Station
Programmable pump start/master valve activation by station for efficient operation.
Internal Junction Box (Outdoor Model)
Outdoor models feature an internal junction box for simplified primary power connection.
24VAC Valve Test Terminal
Provides a terminal for quick valve testing during wire hookup.
Primary Voltage Source Choices
Supports 115VAC/60 Hz or 230VAC/50 Hz transformers for global installation.
AM/PM or 24 Hour Clock Settings
Allows users to select between AM/PM or 24-hour clock formats for timekeeping preference.
Single Station Manual Start
Enables manual watering for a single station for spot treatments or specific needs.
Pro-C Controller Advanced Programming Capabilities
Start Time Stacking for Hydraulic Control
Prevents hydraulic overload by sequencing start times, ensuring zones don't overlap.
Multi-language Capability
Supports multiple languages via customization kits for broader user accessibility.
Simultaneous Solenoid Operation
Can operate up to three 7.2 VA solenoids simultaneously for larger water volume systems.
Assign Zones to Any or All Programs
Allows any station to be assigned to any or all programs for flexible watering schedules.
Automated Chronological Ordering of Start Times
Automatically orders start times chronologically, preventing 'phantom' starts.
Pro-C Controller Connectivity and Testing Features
Easy Access Wire Compartment
Spacious compartment with sturdy terminal block for simplified and secure wire hookups.
Upgrade to Centralized Control via IMMS
Networkable to computer systems for remote programming and monitoring via Hunter IMMS.
Test Program Feature
Built-in test program allows quick system checks or activation of valves during winterization.
Pro-C Controller Technical Information
Operating Specifications
Details electrical and operational parameters like voltage, current, temperature, and NEMA rating.
Dimensions
Provides physical dimensions for both indoor and outdoor Pro-C controller models.
Models and Station Expansion
Lists available Pro-C base models and station expansion modules (PCM-300, PCM-900).
Additional Features Summary
Lists key features such as start times, panel removability, and sensor compatibility.
Pro-C Controller Installation Guide
Connecting Valves and AC Power
Step-by-step instructions for wiring valves and connecting AC power to the controller.
Outdoor Cabinet Wiring Procedure
Procedure for routing AC power cable and conduit through the outdoor cabinet for installation.
Indoor Cabinet Wiring Procedure
Procedure for routing transformer cable through the indoor controller cabinet for installation.
Pro-C Controller Module and Master Valve Installation
Connecting Station Modules
Instructions for installing station expansion modules (PCM-300, PCM-900) using the Easy-Lock feature.
Optional Battery Connection
Guide for connecting a 9-volt battery for programming the controller without AC power.
Connecting a Master Valve
Procedure for wiring and connecting a master valve to the controller's P/MV terminal.
Pro-C Controller Relay and Sensor Installation
Connecting a Pump Start Relay
Instructions for wiring and connecting a pump start relay to the controller's P/MV terminal.
Connecting a Weather Sensor
Guide for connecting rain or weather sensors to the controller's SEN terminals.
Pro-C Controller Remote Control Installation
Connecting an SRR or ICR Remote Control
Instructions for installing the SmartPort wiring harness for the remote control system.
Pro-C Controller Programming Guide
Controller Programming Overview
Introduction to the Pro-C's programming interface, LCD display, and dial design for ease of use.
Setting Current Date and Time
Step-by-step guide to set the controller's current year, month, day, and time accurately.
Setting Watering Start Times
Procedure for setting up to four start times per program (A, B, or C) for flexible watering.
Pro-C Controller Station and Day Scheduling
Setting Station Run Times
Guide for setting watering duration for each station, from 1 minute to 6 hours.
Setting Days to Water
Instructions for configuring watering schedules based on specific days, intervals, or odd/even days.
Pro-C Controller Watering Schedules and Sensor Bypass
Selecting Specific Days of the Week to Water
Enables watering on selected days of the week, indicating water/no water days.
Selecting Interval Watering
Sets watering based on a number of days between watering cycles for consistent schedules.
Selecting Odd or Even Days to Water
Configures watering based on odd or even days of the month, with special notes for 31st/29th.
Weather Sensor Bypass Operation
Details how to bypass the weather sensor using the front panel switch for maintenance.
Pro-C Controller Operation Modes and Manual Control
RUN Mode Operation
Enables automatic execution of all programmed start times and schedules for normal operation.
SYSTEM OFF Mode Operation
Shuts off all watering valves and stops active programs temporarily.
Manually Run a Single Station
Allows manual operation of a single station for testing or specific watering needs.
Manually Run All Stations
Enables manual watering for all stations in sequence, with adjustable run times.
One Touch Manual Start and Advance
Provides a quick way to activate stations manually without using the dial for testing.
Pro-C Controller Advanced Programming and Testing
Seasonal Adjustment for Run Times
Allows global adjustment of watering run times (10-150%) based on seasonal weather changes.
Test Program Functionality
Enables activation of all stations for a set duration for system checks or winterization.
Set Pump/Master Valve Operation by Station
Configures pump/master valve circuit ON or OFF for specific stations individually.
Programmable Rain Off Feature
Stops all programmed watering for a designated period from 1 to 7 days.
Pro-C Controller Hidden Features and Maintenance
Setting Event Day(s) Off
Allows disabling watering on specific days, useful for mowing or special events.
Programmable Delay Between Stations
Inserts a delay between station operations for slow valves or well recovery issues.
Clearing Controller Memory/Resetting Controller
Resets the controller to factory defaults, erasing all user-programmed data.
Hunter Quick Check™ Diagnostic
Circuit diagnostic procedure to identify 'shorts' and wiring problems efficiently.
SRR Remote Control Product Overview
One Transmitter, One Receiver System
Simple and reliable remote control system for Pro-C, ICC, and SRC controllers.
Internal Antenna Transmitter Design
Transmitter features an internal antenna, making it less prone to damage or loss.
Large LCD and Four-Button Operation
User-friendly interface with a large display and simple buttons for easy operation.
Sturdy ABS Construction
Durable ABS plastic construction ensures toughness for repeated use and harsh conditions.
SRR Remote Control Key Features
Small and Compact Size
Portable and compact design allows easy carrying in pockets for convenient daily use.
Standard 9V Alkaline Battery Power
Uses a readily available 9V alkaline battery for long-lasting power.
8 Remote-Activated Run Time Settings
Offers eight selectable run time settings (1-30 minutes) for versatile watering control.
User Programmable Address for Security
Allows setting a unique address for secure communication between transmitter and receiver.
Programmable Number of Stations Controlled
Reprogrammable to support up to 48 stations, offering flexibility for future controller use.
SRR Remote Control Installation and Setup
SmartPort Wiring Harness Preparation
Instructions for preparing the communication port with the SRR SmartPort wiring harness.
Installing the SRR Remote Wiring Harness
Guide for installing the wiring harness using a female threaded 'Tee' fitting.
Extending the Wiring Harness Safely
Advice on extending the harness using shielded cable to prevent errors and malfunctions.
Transmitter Preparation for Use
Guidance on preparing the transmitter for use, including optional customization steps.
SRR Remote Control Transmitter and Receiver Management
Installing the Transmitter Battery
Instructions for installing a 9V alkaline battery into the SRR transmitter.
Changing the Transmitter Address
Procedure to change the transmitter's address for added security and unique identification.
Receiver Address Learning Process
Steps to make the receiver 'learn' the transmitter's address for proper communication.
SRR Remote Control Operation and Configuration
Adjusting Remote Run Time Settings
Allows adjustment of station run times remotely, independent of controller programming.
Activating a Station with SRR Remote
How to remotely turn stations on or off using the SRR transmitter and receiver.
Changing the Maximum Station Number
Procedure to set the maximum station number the transmitter can access for flexibility.
SRR Remote Control Range and Performance Factors
Maximizing Operating Range
Tips and best practices for optimizing the SRR remote control's operating range.
Understanding Operating Range Influences
Explanation of factors influencing remote control range, such as terrain and obstructions.
SRR Remote Control Technical Specifications
Models and Components Overview
Lists available SRR kit, transmitter, receiver, and connection kit components.
Transmitter and Receiver Dimensions
Provides physical dimensions for both the SRR transmitter and receiver units.
Operating Specifications Summary
Details address codes, max stations, run times, and range of the SRR system.
Electrical Specifications Details
Covers electrical details for transmitter (battery) and receiver (voltage, current, frequency).
Need help?
Do you have a question about the PCM-300 and is the answer not in the manual?
Questions and answers