Table of Contents
Advertisement
20
Image
Projection
Front-Desktop
•
Rear-Desktop
•
Rear-Ceiling
•
Front-Ceiling
•
Aspect Ratio
Use this function to choose your desired aspect ratio.
•
•
•
Manual Keystone
Adjust image distortion caused by tilting projection. (±40 degrees)
<Note> The Manual Keystone funcion is unavailable under Auto
Keystone setting to "On".
H. Position
•
(Horizontal
•
position)
V. Position
•
(Vertical position)
•
Frequency
"Frequency" changes the projector's refresh rate to match the
frequency of your computer's graphics card. If you can see a vertical
flickering bar in the projected image, use this function to make the
necessary adjustments.
The factory default setting.
When you select this function, the projector reverses the image
so you can project from behind a translucent screen.
When you select this function, the projector reverses and inverts
the image at same time. You can project from behind a
translucent screen with ceiling mounted projection.
When you select this function, the projector inverts the image
for ceiling-mounted projection.
Auto: Keep the image with original width-higth ratio and maxi
mize the image to fit native horizontal or vertical pixels.
4:3: The image will be scaled to fit the screen and displayed
using a 4:3 ratio.
16:9: The image will be scaled to fit the width of the screen and
the height adjusted to display the image using a 16:10 ratio.
Press
to move the image left.
Press
to to move the image right.
Press
to move the image down.
Press
to move the image up.
Advertisement
Table of Contents
