Table of Contents
Advertisement
SAGE THERMAL GAS MASS FLOW METER
Operations and
Instruction Manual
For Prime Models SIP and SRP
DOCUMENT NUMBER 100-0065
REVISION 16 - SIP/SRP (SAGE PRIME™)
Make the Wise Choice.
Choose Sage Flow Meters.
SAGE METERING, INC.
8 Harris Court, D1
Monterey, CA 93940
1-866-677-SAGE (7243)
Tel 831-242-2030
Fax 831-655-4965
www.sagemetering.com
Advertisement
Table of Contents
Related Manuals for Sage SRP
Summarization of Contents
Getting Started
Welcome and Initial Inspection
Introduction to the Sage Metering Mass Flow Meter and procedures for initial inspection and unpacking.
Meter Maintenance and Calibration
Guidelines for minimal meter maintenance and performing in-situ calibration checks using diagnostics.
Installation and Mounting Procedures
Comprehensive guide for installing and mounting the meter, covering wiring, diagrams, and application types.
Wiring Diagram and Application Types
Guidance on locating wiring diagrams and considerations for insertion/in-line flow meter applications.
Valve, Fitting, and Conditioner Operation
Operation details for optional valve assemblies, compression fittings, and flow conditioners.
Probe Insertion and Depth Charts
Step-by-step probe insertion guidelines and depth charts for accurate placement.
Large Duct and In-Line Meter Installation
Specific installation advice for large ducts and in-line flow meter applications.
Integral and Remote Meter Wiring
Terminal hookup and wiring details for Integral (SIP) and Remote (SRP) meter models.
Remote Junction Box Wiring
Wiring instructions for the junction box used with remote style meters.
Specifications and Features
Principle of Thermal Mass Flow Measurement
Explanation of the scientific principle behind how thermal mass flow meters measure gas flow.
Sage Prime Meter Benefits and Styles
Highlights the key advantages, features, and different styles of the Sage Prime meter.
Technical Specifications and Approvals
Details on meter styles, technical specifications, and safety/regulatory approvals.
Organic (OLED) Display Functions
Description of the meter's display interface, its indicators, and various operational functions.
Drawings and Mounting
SIP and SRP Meter Dimensional Drawings
Dimensional drawings for SIP integral and SRP remote style flow meters, including in-line and insertion types.
Remote Bracket and Mounting Options
Diagrams illustrating remote meter bracket layouts and various mounting options.
Mounting Hardware and Valve Assemblies
Detailed descriptions and specifications for various mounting hardware components like valve assemblies and fittings.
Low Pressure Isolation Valve Assembly
Specifications for the SVA05LP low pressure isolation valve assembly for insertion meters.
Optional Flanged Connections
Information on optional flanged end connections and mounting for in-line and insertion meters.
Diagnostics and Troubleshooting
Common Meter Issues and Solutions
Identifies typical meter issues like display problems or erratic readings and provides their causes and solutions.
Field Calibration and Sensor Checks
Guide for performing in-situ calibration checks and troubleshooting sensor performance.
Warranties and Service
Product Warranty and Return Policies
Details the limited warranty terms, conditions, and policies for cancelling orders or returning products.
Meter Return Procedures
Instructions for obtaining an RMA and properly packaging meters for return to the factory for service.
Modbus Communication Protocol
Modbus Register Map and Protocol Overview
Lists Modbus registers, protocol overview, message framing, and supported function codes.
Register Data Formats and Addresser Software
Describes register data formats (Integer, Float, Scaled) and the Sage Addresser software for configuration.
Addresser Printout Example
A typical printout from the Sage Addresser software showing meter parameters and their hex/decimal values.
Appendix and Advanced Topics
Field Programmable "Dongle" Usage
Explains the function and usage of the Sage Prime field programming dongle for configuration and calibration.
Calibration Factors and Installation Advice
Provides correction factors for gas calibration and advice for installations with pipe condensation.
Junction Box Orientation and Meter Technology
Diagrams for junction box orientation and a basic explanation of thermal mass flow meter technology.
Need help?
Do you have a question about the SRP and is the answer not in the manual?
Questions and answers