Advertisement
Quick Links
www.ifbappliances.com
India's Finest Brand
Trusted by millions
www.ifbappliances.com
The user manual
CHIMNEY
Read the manual carefully before using the chimney
CALL ONLY IFB AUTHORISED PERSON TO SERVICE YOUR
CHIMNEY & USE ONLY GENUINE SPARES IF IN ANY CASE IT'S
REQUIRE
If any protective film is fixed on the product please peel off before using the product
IFB-印度 说明书
编码：3070500647
备注：20150117更新
Advertisement
Related Manuals for IFB IFB GL-90 ISLAND-90CM
Summarization of Contents
Warranty Terms & Conditions
Limitations of the Warranty
Outlines specific cases where the warranty becomes void, including incomplete documentation or unauthorized repairs.
Installation Steps
Step 1: Fix Chimney Position
Determine and fix the chimney's position relative to the hob for optimal height.
Step 2: Prepare Chimney Assembly
Unpack the chimney, attach the reducer to the air outlet, and connect the exhaust pipe.
Step 3: Attach Support Frame
Align and securely fix the low support frame to the blower box assembly.
Step 4: Connect Duct Covers
Insert the upper duct cover into the low duct cover as per the design.
Step 5: Position Duct Covers
Place duct covers onto the blower box assembly and align the exhaust pipe.
Step 6: Install Ceiling Cover
Securely fix the ceiling cover to the ceiling using expanding screws.
Step 7: Attach Upper Support
Fix the upper support frame beneath the ceiling cover.
Step 8: Align Chimney Sections
Ensure the low support frame covers the upper support frame and secure them.
Step 9: Route Exhaust Pipe
Extend the exhaust pipe outdoors, ensuring it has a significant bend.
Step 10: Secure Upper Duct Cover
Pull the upper duct cover to the ceiling and fix it with screws.
Step 11: Install Filter
Insert the filter by aligning its pin with the corresponding hole.
Step 2: Fix Duct Cover Hook
Attach the upper duct cover hook to the upper duct cover using screws.
Step 3: Connect Upper to Low Duct
Place the upper duct cover onto the low duct cover, respecting the orientation slot.
Step 4: Secure Low Duct Cover
Fasten the low duct cover to the blower box assembly with screws.
Step 5: Mount Outer Duct Cover
Align and fix the outer duct cover to the blower box using screws.
Step 6: Prepare Wall Mounting
Mark and drill holes for mounting the inner duct cover, insert tubes, and fix screws.
Step 7: Route Exhaust Pipe Outdoors
Extend the exhaust pipe outdoors, ensuring a bend greater than 120 degrees.
Step 5: Position Chimney Height
Fix the chimney at the recommended height (650-750mm) from the hob.
Precautions and Warnings
Important Usage and Safety Notes
Highlights the importance of following manual instructions for performance and safety, noting fire risks.
Disclaimers and Liability
Company disclaims liability for damages from non-compliance or inaccuracies.
Ducting Mode and Maintenance
Ducting Mode Operation
Information on ducting mode, filter cleaning frequency, and speed settings.
Lights Replacement
Instructions for replacing LED and standard light bulbs in the chimney.
Cleaning Recommendations
Guidance on cleaning the chimney and cooktop using appropriate materials.
Control Panel and Functions
Remove Control Overview
Details the functions of control buttons like standby, cleaning, timer, lamp, and fan speed.
Remote Control Functions
Describes the functions of the remote control accessory.
Touch Control Operation
Model IFB-GS-60T-PL/90T-PL Controls
Explains the touch control panel features including lamp, timer, speed, and power functions.
Mounting Bracket Installation
Guide for fixing the mounting bracket to the inner and outer duct covers.
Inner Duct Cover Installation
Steps for installing the inner duct cover by connecting it to the outer duct cover.
Control Switch Layout and Operation
Control Layout for Specific Models
Illustrates the control switch layout for models IFB-GN-5P/GL-6P/SS-63P.
Control Operation for IFB-GL-90/GL-14T Models
Details the operation of controls like lamp, timer, display, speed, and power for specific models.
Need help?
Do you have a question about the IFB GL-90 ISLAND-90CM and is the answer not in the manual?
Questions and answers