Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Sail F8
Summarization of Contents
General Information
Safety Information
General safety precautions and warnings for operation.
Fuel and Oil
Fueling Instructions
Guidance on safe and proper refueling procedures.
Engine Oil
Information on recommended engine oil types and quantities.
Operations of Controls and Other Functions
Fuel Tank
Details about the portable fuel tank components and capacity.
Gear Shift Lever
Explains the operation of the gear shift lever for forward, neutral, and reverse.
Engine Controls
Engine Stop Button
How to use the engine stop button to shut down the motor.
Engine Stop Lanyard Switch
Instructions for using the safety lanyard to stop the engine.
Choke Knob
Explanation of the choke knob for starting the engine.
Recoil Starting Handle
How to use the recoil starter handle to start the engine.
Steering and Trim Controls
Steering Friction Adjusting Screw
How to adjust steering resistance for smoother operation.
Trim Angle Adjusting Rod
Explains the trim angle adjustment rod for motor positioning.
Warning Indicator
Description of the warning indicator light and its function.
Tilt Lock Mechanism
How the tilt-lock mechanism prevents the motor from dropping.
Tilt Support and Cowling
Tilt Support Bar
The function of the tilt support bar in keeping the motor tilted up.
Top Cowling Lock Lever
How to remove and secure the engine's top cowling.
Warning System
Low Oil Pressure Warning
Explains the low oil pressure warning system and its indicators.
Operation
Installation
Guidance on installing the outboard motor on the boat.
Clamping the Outboard Motor
Steps for securely clamping the motor to the boat's transom.
Tilting Procedures
Procedure for Tilting Down
Steps to tilt the outboard motor down into its operating position.
Procedure for Tilting Up
Steps to tilt the outboard motor up for shallow water or storage.
Shallow Water Cruising Setup
Procedure for Set Up
Steps to set up the motor for shallow water cruising.
Returning to Original Position
How to return the motor to its normal position from shallow water mode.
Cruising in Other Conditions
Cruising in Salt Water
Recommended procedure for flushing the cooling system after salt water use.
Cruising in Turbid Water
Recommendation for using a special kit for turbid water conditions.
Maintenance
Transporting and Storing Outboard Motor
General precautions for transporting and storing the motor.
Trailering Outboard Motor
Guidelines for trailering the outboard motor safely.
Storing Outboard Motor
Detailed steps for storing the motor for extended periods.
Periodic Maintenance
Maintenance Chart
A table outlining maintenance items, intervals, and responsibilities.
Fuel System Checks
Checking Fuel System
How to inspect the fuel system for leaks and proper function.
Inspecting Fuel Filter
Procedure for inspecting and replacing the fuel filter.
Component Checks
Checking Timing Belt
Inspection points for the timing belt and when to replace it.
Checking Wiring and Connectors
How to check wiring and connectors for secure connections.
Exhaust Leakage
How to check for exhaust leaks from the engine.
Water Leakage
How to check for water leaks from the engine.
Checking Propeller
How to inspect the propeller for damage and wear.
Propeller Installation and Removal
Removing the Propeller
Steps for safely removing the propeller.
Installing the Propeller
Steps for correctly installing the propeller.
Gear Oil and Fuel Tank Maintenance
Changing Gear Oil
Procedure for changing the gear oil in the lower unit.
Cleaning Fuel Tank
How to clean the fuel tank to prevent contamination.
Inspecting and Replacing Anode
How to inspect and replace sacrificial anodes for corrosion protection.
Checking Bolts and Nuts
How to check that critical bolts and nuts are properly tightened.
Temporary Action in Emergency
Impact Damage
What to do if the outboard motor sustains impact damage.
Starter Will Not Operate
Procedure for starting the engine using an emergency starter rope.
Need help?
Do you have a question about the F8 and is the answer not in the manual?
Questions and answers