ZENEC ZE-NC520 - NAVIGATION Software Manual page 16

Icon
A TMC receiver is connected and a radio station with TMC broadcast is received.
There are new, unread TMC events.
A part of the route is bypassed based on TMC events.
A part of the route is mentioned in TMC events but could not be bypassed (for example,
the destination is on a congested street).
The following information can be seen in the three data fields shown on the map screen. Tap this area
to open the Trip Information screen where you can select which values to be shown in these three
fields.
When there is no active route, these fields show the following information: current speed, compass
and the current time of day.
Icon
The next area is the GPS position quality indicator field. Tap this area to open the Quick menu (page
49).
Icon
16
Type
Compass
Speed information
Time information
Distance information
Status for
GPS position quality
Description
More information
Shows the direction of your heading both when the
map is automatically rotated (3D) and when the
map is always facing North (2D).
There are speed values that can be shown:
Current speed
Speed limit on the current road
There are time values that can be shown:
Current GPS time
Time remaining to reach the destination
Time remaining to reach the next via point
Estimated arrival time at the destination
Estimated arrival time at the next via point
There are distance type values that can be shown:
Distance remaining to reach the destination
Distance remaining to reach the next via
point
Current altitude
More information
A higher number of lit bars indicates better GPS
position accuracy.