Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for TP-Link Archer A50
Summarization of Contents
About This Guide
Conventions Used
Explains the conventions used in the guide, including text formatting and symbols for clarity.
Additional Resources
Provides links to download center, support forum, and contact information for further assistance.
Get to Know Your Router
Product Overview
Details the router's features, design for SOHO networks, and its powerful antennas for Wi-Fi coverage.
Panel Layout
Describes the physical layout of the router, including front and back panels and their components.
Top View LED Explanation
Provides a table explaining the status and indication of each LED on the router for operational feedback.
Back Panel Components
Details the components and ports located on the back panel of the router for connectivity.
Connect to the Internet
Router Placement Guide
Guidance on optimal placement of the router to avoid moisture, heat, tripping hazards, and interference.
Hardware Connection Steps
Instructions for physically connecting the router to your modem and power source for initial setup.
Computer Connection Methods
Steps to connect a computer to the router via Ethernet cable or wirelessly using SSID and password.
WPS Connection Method
Explains how to use the WPS button for a quick and secure wireless connection with compatible devices.
Configure Router in Wireless Router Mode
Router Status Overview
View current status information of the router, including firmware, hardware, LAN, WAN, and wireless status.
Quick Setup Guide
Guides through the essential steps for connecting your router to the internet and configuring wireless settings.
Operation Mode Selection
Allows selection between Wireless Router mode and Access Point mode for different network setups.
Network Configuration
Configure network settings, including WAN, LAN, and IPTV options for optimal internet connectivity.
Basic Wireless Settings
Configure basic wireless parameters like SSID, encryption, and security for your Wi-Fi network.
DHCP Server Settings
Manage DHCP server settings to dynamically assign IP addresses to devices on your network.
Security Features
Implement security measures like firewall, VPN passthrough, and advanced security settings to protect your network.
System Tools
Access tools for managing time, LEDs, feedback, diagnostics, firmware, and factory defaults.
WAN Connection Setup
Dynamic IP WAN
Configure Dynamic IP connection type for internet access, including Renew and Release options.
Static IP WAN
Configure Static IP connection type with ISP-provided IP address, subnet mask, and gateway.
PPPoE WAN Connection
Setup for PPPoE connections requiring username, password, and other ISP-provided parameters.
PPTP/L2TP WAN Connection
Configuration for PPTP and L2TP VPN connections, including username, password, and addressing type.
LAN and IPTV Settings
LAN Settings Configuration
Configure LAN IP address, subnet mask, and MAC address for the router's local network.
IPTV Configuration
Setup for IPTV services, including IGMP Snooping, IGMP Proxy, and mode selection for LAN ports.
Wireless Network Configuration
Dual Band Selection
Enable or disable 2.4GHz and 5GHz wireless bands to manage dual-band Wi-Fi.
Basic Wireless Settings
Configure basic wireless parameters like SSID, encryption, and security for your Wi-Fi network.
WPS Wireless Setup
Guide to using WPS for quick and secure connection of wireless devices to the router's network.
Wireless Security Setup
Set up security for your wireless network using WPA2-PSK, WPA-PSK, or WEP encryption.
Network Access Control
Wireless Schedule
Schedule automatic turn-on/off times for your wireless network to conserve power or manage usage.
Wireless MAC Filtering
Control wireless access by allowing or denying devices based on their MAC addresses.
Advanced Wireless and System Settings
Advanced Wireless Settings
Fine-tune wireless performance with settings like Transmit Power, Beacon Interval, and RTS Threshold.
Wireless Statistics
View statistics on wireless client connections, including MAC address, status, and packet counts.
Guest Network Setup
Create a separate Wi-Fi network for guests, with customizable permissions and optional Facebook Wi-Fi integration.
DHCP and IP Management
DHCP Settings Configuration
Configure DHCP server parameters like IP address pool, lease time, and DNS server for automatic IP assignment.
DHCP Client List
View a list of devices currently connected to the network via DHCP, including their MAC and assigned IP addresses.
Address Reservation
Reserve specific IP addresses for devices by binding them to their MAC addresses for consistent network access.
Port Forwarding and NAT
Virtual Server Setup
Configure virtual servers to allow external access to specific internal services like web servers or FTP.
Port Triggering Configuration
Configure port triggering rules to automatically open external ports for specific applications like online games or VoIP.
DMZ Host Configuration
Set up a DMZ host to expose a PC to the internet with all ports open, useful for gaming or specific applications.
UPnP Configuration
Enable UPnP to allow applications and devices to automatically open ports for seamless communication and gaming.
Security and Access Control
Basic Security Settings
Configure essential security features like firewall, SPI firewall, and VPN passthrough for network protection.
Advanced Security Settings
Protect against DoS attacks (ICMP, UDP, TCP-SYN floods) and configure ping packet filtering.
Local Management Control
Control which PCs on the LAN can access the router's web management page via MAC address filtering.
Remote Management Settings
Configure remote management settings to access the router's web interface from a remote device via the internet.
Parental and Access Controls
Parental Control Features
Block inappropriate websites and control access to specific sites at scheduled times for children's devices.
Host Access Control
Define hosts (by MAC address) to allow or deny network access based on time and content restrictions.
Target Access Control
Specify target URLs or keywords to be blocked or allowed for access control rules.
Access Control Rule Management
Create and manage access control rules by combining hosts, targets, and schedules for network access policies.
Advanced Routing and Bandwidth Control
Static Route List Configuration
Manually configure static routes by defining destination IP addresses, subnet masks, and gateways.
System Routing Table
View the router's system routing table, showing destination networks, subnet masks, gateways, and interfaces.
Bandwidth Control Settings
Configure total Egress and Ingress bandwidth limits for the router to manage internet speeds.
Bandwidth Control Rules
Create specific bandwidth control rules for devices or IP ranges, defining priority and bandwidth limits.
IP & MAC Binding and Dynamic DNS
ARP Binding Settings
Enable ARP binding to link IP addresses to MAC addresses, preventing ARP spoofing and unauthorized access.
IP & MAC Binding Entries
Add or modify IP & MAC binding entries to enforce security policies by linking specific IP and MAC addresses.
ARP List
View the ARP list to observe devices on the LAN and check existing IP & MAC binding entries.
Dynamic DNS (DDNS) Setup
Configure Dyndns service to access your router or hosted servers using a dynamic domain name.
IPv6 Configuration
IPv6 Status
View the current IPv6 status, including WAN and LAN connection details and assigned addresses.
IPv6 WAN Settings
Configure IPv6 WAN connection types (Dynamic, Static, PPPoEv6, 6to4) for internet access.
Dynamic IPv6 Configuration
Set up dynamic IPv6 addressing, including IPv6 address, prefix length, gateway, and addressing type.
Static IPv6 Configuration
Configure static IPv6 addressing, including IPv6 address, prefix length, gateway, and DNS server.
PPPoEv6 Configuration
Configure PPPoEv6 connection with PPP username/password, authentication type, and addressing type.
IPv6 LAN Settings
Configure IPv6 LAN settings, including address autoconfiguration and site prefix configuration types.
System Tools and Maintenance
Time Settings
Set router time manually or configure automatic time synchronization via NTP server, including Daylight Saving.
Diagnostic Tools
Use diagnostic tools like Ping and Traceroute to test network connectivity, reachability, and performance.
Firmware Upgrade
Download and install the latest firmware to update the router's software for improved features and security.
Factory Defaults Reset
Restore router settings to factory defaults to resolve issues or start fresh, resetting username, password, and IP.
Backup and Restore Configuration
Backup router configuration settings for safekeeping or restore previous settings from a backup file.
Router Reboot Options
Restart the router manually or schedule automatic reboots to apply settings or refresh the device.
Password Management
Change the default router username and password for enhanced security and access control.
System Log Viewing
View system logs to monitor router activity, events, and troubleshoot issues.
Traffic Statistics
Monitor network traffic statistics for each PC on the LAN, including packet and byte counts.
Configure Router in Access Point Mode
Access Point Mode Status
View the current status of the router when operating in Access Point mode, including LAN and wireless information.
Access Point Quick Setup
Guides through the essential steps for setting up the router in Access Point mode for internet access.
Access Point Operation Mode
Select and configure the router to operate as an Access Point, extending wired network wirelessly.
Access Point Network Settings
Configure network settings, including LAN IP parameters, for the router in Access Point mode.
Access Point Wireless Settings
Configure wireless parameters like SSID, mode, and security for the router in Access Point mode.
Access Point System Tools
Access system tools like time settings, LED control, and diagnostics for the router in Access Point mode.
Access Point Specific Configurations
Access Point Mode Configuration
Instructions to connect the router to an existing wired router and configure it for Access Point mode.
Access Point LAN Settings
Configure LAN settings, including IP address and subnet mask, for the router in Access Point mode.
Access Point Dual Band Selection
Select wireless bands (2.4GHz/5GHz) for the router operating as an Access Point.
Access Point Wireless Network Name (SSID)
Set the wireless network name (SSID) for the router when it functions as an Access Point.
Access Point WPS Setup
Guide to using WPS for quick and secure connection of wireless devices to the Access Point.
Access Point Wireless Security
Configure wireless security settings (WPA2-PSK, WPA-PSK) for the router in Access Point mode.
Access Point Wireless Schedule
Schedule wireless network on/off times for the router in Access Point mode.
Access Point Wireless MAC Filtering
Control wireless access by MAC address for clients connecting to the Access Point.
Access Point Advanced Wireless Settings
Fine-tune advanced wireless settings for the Access Point, like Transmit Power and Beacon Interval.
Access Point Wireless Statistics
View wireless connection statistics for clients connected to the Access Point.
Throughput Monitor
Monitor wireless throughput performance, showing transmit and receive rates over time.
Guest Network Setup
Guest Network Permissions
Customize guest network permissions, including local network access and bandwidth control.
DHCP and System Tools in AP Mode
DHCP Settings Configuration (AP Mode)
Configure DHCP server settings for the router in Access Point mode, if applicable.
DHCP Client List (AP Mode)
View DHCP client list for devices connected to the router in Access Point mode.
Address Reservation (AP Mode)
Reserve IP addresses for specific clients by MAC address in Access Point mode.
Time Settings (AP Mode)
Set router time manually or automatically for the router in Access Point mode.
LED Control (AP Mode)
Control router LED behavior based on schedule in Access Point mode.
Diagnostic Tools (AP Mode)
Use diagnostic tools for connectivity testing in Access Point mode.
Frequently Asked Questions (FAQ)
FAQ: Forget Wireless Password
Troubleshoot forgotten wireless passwords by connecting via Ethernet and resetting or retrieving the password.
FAQ: Forget Login Password
Troubleshoot forgotten router login passwords by resetting to factory defaults and using default credentials.
FAQ: Cannot Access Web Management Page
Steps to resolve issues accessing the router's web management page, including network settings and browser checks.
FAQ: WDS Bridging Setup
Guide on using WDS Bridging to extend wireless network coverage by connecting an extended router to a root router.
FAQ: Cannot Access Internet
Troubleshoot internet access issues by checking WAN status, DNS configuration, and performing modem/router restarts.
FAQ: MAC Address Issues
Resolve internet access problems by cloning MAC address or modifying LAN IP address to avoid conflicts.
FAQ: Wireless Network Not Found/Connect
Troubleshoot issues finding or connecting to the wireless network, including adapter drivers and password mismatches.
Need help?
Do you have a question about the Archer A50 and is the answer not in the manual?
Questions and answers