Download Print this page

iNetVu 7710 Quick Start Manual

Auto-acquire and the 7700 series controller
Hide thumbs Also See for 7710:

Advertisement

Quick Links

Viasat SurfBeam® 2 Auto-Acquire and the iNetVu® 7700
Series Controller
Su 2
ViaSat SurfBeam® 2 (Auto-Acquire)
1-877-iNetVu6
www.c-comsat.com
Revision 2.0
February 8, 2017

Advertisement

loading
Need help?

Need help?

Do you have a question about the 7710 and is the answer not in the manual?

Questions and answers

Summarization of Contents

Safety and Warning Information
NOTICE
Disclaimer from C-COM Satellite Systems Inc. regarding warranty and liability for this manual.
Equipment Safety Precautions
Safety precautions for equipment setup and operation, emphasizing cable connection and grounding.
System Overview
iNetVu Mobile Application
Overview of the iNetVu Mobile application and its capabilities.
Key Features of Mobile Application
Lists the core functionalities of the iNetVu Mobile application.
Pre-Configuration Check List
Verify Modem Software Version
Instruction to check the modem software version via its webpage.
Initial Controller Configuration and Verification Test
Communication Method Setup
Details on setting up communication between IMS and the iNetVu Controller.
Modem VSAT Communication Parameters
Explains the parameters required for modem and VSAT communication.
Tips and Recommendations
Satellite Search Methods
Describes different satellite search methods available in the system.
Compass Interference Issues
Addresses potential compass interference and recommended solutions.
Software Setup and Initial Configuration Procedure
Configure PC Network Settings
Guide to configuring PC network settings for controller communication.
Configure TCP IPv4 Settings
Steps to configure TCP/IPv4 settings on the PC.
Set Static IP Addresses
Instructions for setting static IP addresses for PC and controller.
Software Installation and Configuration
Install FTDI USB Driver
Instructions for installing the necessary FTDI USB driver.
Install iNetVu 7710 Software
Steps to install the iNetVu 7710 software.
Connect Controller to PC via USB
Guidance on connecting the controller to the PC using the USB cable.
Launch iNetVu Mobile 7710 Software
Instructions on how to launch the iNetVu Mobile 7710 application.
iNetVu Setup Wizard
Initial Setup Wizard Prompt
Describes the initial prompt for the iNetVu Setup Wizard.
Controller Firmware Update Prompt
Details the prompt for updating controller firmware if versions mismatch.
Update Controller Firmware
Step-by-step guide for updating controller firmware.
Configure Platform Information
Guide to configuring platform specific details in the setup wizard.
Complete Service Information
Instructions for filling out service type, interface, and modem configuration.
Finalize Setup Wizard
Final step to complete the setup wizard and save changes.
Confirm Exit Setup Wizard
Prompt asking user to confirm saving and exiting the setup wizard.
Configuration Complete Notification
Congratulatory message and next steps after configuration.