Advertisement
Advertisement
Related Manuals for Saltmate SMT150
Summarization of Contents
Installation Instructions
The Power Pack
Details mounting and power connection for the Saltmate power pack.
The Electrolytic Cell
Explains cell plumbing and connection to the junction box.
Chemical Maintenance
Initial Preparation
Guide for setting initial salt levels and performing super chlorination.
Recommended Levels for Optimal Operation
Outlines ideal salt, chlorine, pH, and alkalinity levels.
Operating Your Saltmate
Starting Up
Steps to turn on the chlorinator and set initial output after installation.
Daily Operating Time
Advice on adjusting run time based on pool conditions and temperature.
Setting the Timer
Instructions on how to program the 24-hour timer for operation.
Power Pack Care
Advises on maintenance and avoiding damage to the power pack unit.
No Water Flow Indicator
Explains the no-water-flow sensor and indicator light function.
Pool Operation Settings
Guide for setting the Saltmate for different pool operations like vacuuming.
Electrolytic Cell Care
Key points for maintaining the cell to prevent premature failure.
Cleaning the Cell
Step-by-step guide on how to clean the electrolytic cell.
Troubleshooting
Testing Chlorine Production
Procedure to test chlorine output efficiency using water samples.
Chlorine Indicator Not Reading
Checks for issues when the chlorine indicator shows no reading while running.
Low Free Chlorine Residual
Troubleshooting steps for low free chlorine levels in the pool.
Warranty Information
Warranty Checklist
Points to check before contacting Saltmate for a warranty claim.
Need help?
Do you have a question about the SMT150 and is the answer not in the manual?
Questions and answers