Advertisement
INSTALLATION AND OPERATION INSTRUCTIONS
4400 SERIES POWER PAKS
IMPORTANT INFORMATION
To register your product, visit our web site at www.
perlick.com. Click on Commercial, then Service.
You will see the link to Warranty Registration Form.
You must complete and submit this form or the
installation date will revert back to the ship date.
Permanently mount the enclosed Warning/Safety
Instruction label in a visible location near the CO2
regulator.
This manual has been prepared to assist you in the
installation of your Century Remote Beer System and
to acquaint you with its operation and maintenance.
We dedicate considerable time to ensure that our
products provide the highest level of customer
satisfaction. If service is required, your dealer can
provide you with a list of qualified service agents. For
your own protection, never return merchandise for
credit without our approval.
We thank you for selecting a Perlick product and assure
you of our continuing interest in your satisfaction.
8300 West Good Hope Road • Milwaukee, WI 53223 • Phone 414.353.7060 • Fax 414.353.7069
Toll Free 800.558.5592 • E-Mail perlick@perlick.com • www.perlick.com
C
Table of Contents
Sizes & Specifications ............................................ 2-3
Air-Cooled Models ................................................. 2
Water-Cooled Models ............................................ 3
General Information .......................................... 4
Installation ........................................................ 5
Connecting Power Pak to Trunk Housing .............. 6
Connecting to Trunk Housing ................................ 7
Power Pak Start-Up ................................................... 8
LEDS ......................................................................... 9
Preventative Maintenance ......................................... 9
Replacement Parts .................................................. 10
Wiring Diagrams ...................................................... 11
MODELS
4400 Series
4404
4404W
4410
4410W
4414
4414W
4414-230
4420W
4420
US
Form No. Z2020
Rev. 10.23.2017
Advertisement
Table of Contents
Related Manuals for Perlick 4414
Summarization of Contents
General Information
Product Description
Overview of the 4400 Series Power Pak product line and its features.
Installation
Important Safety Warnings
Critical safety precautions to follow before installing or operating the product.
Installing the Power Pak
Procedures for installing the Perlick Power Pak unit and ensuring proper electrical connections.
All Models Installation
General placement and connection guidelines applicable to all 4400 Series Power Pak models.
Water-Cooled Models Installation
Specific installation considerations for water-cooled models, including plumbing and environmental factors.
Connecting Trunk Housing Coolant Lines
To Dispensing Head
Guidance on connecting coolant lines from trunk housing to the dispensing head.
Start-Up Procedure
System Start-Up
Steps for initiating the system start-up, including coolant filling and pump operation.
Digital Temperature Controller
Explanation of the electronic thermostat settings and operation.
LEDs and Display Messages
Meaning of LEDs
Explanation of the function and mode of the unit's LEDs.
Display Message Meanings
Interpretation of messages shown on the unit's display.
Preventative Maintenance and Alarms
How to change the SETPOINT
Instructions for adjusting the unit's setpoint value.
Alarm Meanings
Description of alarm codes and recommended actions.
Need help?
Do you have a question about the 4414 and is the answer not in the manual?
Questions and answers