Advertisement
INSTALLATION AND OPERATION INSTRUCTIONS
4400 SERIES POWER PAKS
IMPORTANT INFORMATION
To register your product, visit our web site at www.
perlick.com. Click on Commercial, then Service.
You will see the link to Warranty Registration Form.
You must complete and submit this form or the
installation date will revert back to the ship date.
Permanently mount the enclosed Warning/Safety
Instruction label in a visible location near the CO2
regulator.
This manual has been prepared to assist you in the
installation of your Century Remote Beer System and
to acquaint you with its operation and maintenance.
We dedicate considerable time to ensure that our
products provide the highest level of customer
satisfaction. If service is required, your dealer can
provide you with a list of qualified service agents. For
your own protection, never return merchandise for
credit without our approval.
We thank you for selecting a Perlick product and assure
you of our continuing interest in your satisfaction.
8300 West Good Hope Road • Milwaukee, WI 53223 • Phone 414.353.7060 • Fax 414.353.7069
Toll Free 800.558.5592 • E-Mail perlick@perlick.com • www.perlick.com
C
Table of Contents
Sizes & Specifications ............................................ 2-3
Air-Cooled Models ................................................. 2
Water-Cooled Models ............................................ 3
General Information .......................................... 4
Installation ........................................................ 5
Connecting Power Pak to Trunk Housing .............. 6
Connecting to Trunk Housing ................................ 7
Power Pak Start-Up ................................................... 8
LEDS ......................................................................... 9
Preventative Maintenance ......................................... 9
Replacement Parts .................................................. 10
Wiring Diagrams ...................................................... 11
MODELS
4400 Series
4404
4404W
4410
4410W
4414
4414W
4414-230
4420W
4420
US
Form No. Z2020
Rev. 10.23.2017
Advertisement
Table of Contents
Summary of Contents for Perlick 4404
-
Page 1: Table Of Contents
For your own protection, never return merchandise for credit without our approval. We thank you for selecting a Perlick product and assure you of our continuing interest in your satisfaction. Form No. Z2020 Rev. -
Page 2: Sizes & Specifications
4408SS Wall Bracket for 4404 & 4410 only C21499BSS Stainless Steel Table Stand **Requires four wires (2 hot, 1 neutral and 1 ground). Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice... -
Page 3: Water-Cooled Models
C22296A-20 Cord Kit for 120V single pump Power Paks only (Field Installed) C21499BSS Stainless Steel Table Stand WATER INLET WATER OUTLET Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice Form No. Z2020 Rev. 10.23.2017... -
Page 4: General Information
4431 - Pump kit, 115V, 5.6 A, 100 gph, 130 psig Models 4414, 4414W 4432 - Pump kit, 230V, 2.8 A, 100 gph, 130 psig Models 4414-230, 4420 Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice... -
Page 5: Installation
4400 SERIES POWER PAKS - INSTALLATION Operation/Installation Manual Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice Form No. Z2020 Rev. 10.23.2017... -
Page 6: Connecting Power Pak To Trunk Housing
• Slide coolant lines through 3-1/2” donut hole previosly cut in walk-in cooler wall. Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice... -
Page 7: Connecting To Trunk Housing
4400 SERIES POWER PAKS - INSTALLATION Operation/Installation Manual Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice Form No. Z2020 Rev. 10.23.2017... -
Page 8: Power Pak Start-Up
Power Pak to cut-out on the temperature control. Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice... -
Page 9: Leds
The controller has been factory programmed to continue operation with the compressor cycling on and off in 5 minute intervals. Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice Form No. Z2020 Rev. 10.23.2017... -
Page 10: Replacement Parts
Compression Fitting 63296-3 V-Clamp 63291-2 Switch 63303 Pump Insulation 64425 Drier 63297 Zip Tie, Pump Insul 57551 Coolant Solution 63299-1 Temp Control Kit 67177 Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice... -
Page 11: Wiring Diagrams
4400 SERIES POWER PAKS - WIRING DIAGRAMS Operation/Installation Manual Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice Form No. Z2020 Rev. 10.23.2017... - Page 12 Quality & Innovation inspires that inspires Form No. Z2020 Rev. 10.23.2017 8300 West Good Hope Road • Milwaukee, WI 53223 • Phone 414.353.7060 • Fax 414.353.7069 Toll Free 800.558.5592 • E-Mail perlick@perlick.com • www.perlick.com...