Table of Contents
Advertisement
Petrol Powered Pressure Washers
READ THIS MANUAL CAREFULLY BEFORE USE – FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY
DAMAGE AND MAY VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by
this manual may vary in appearance, assembly, inclusions, specifications, description and packaging.
The product is NOT supplied with engine oil, although traces of oil from the manufacturing
process may be present. It is essential to add adequate engine oil of the correct type to the
engine before use – see
product
warranty.
E&OE
User Manual
[Revision 1.0 May 2017]
Checking and Changing Engine
© 2017 Jet-USA
Oil.
Failure to add engine oil will void the
Advertisement
Table of Contents
Related Manuals for Jetusa MX400
Summarization of Contents
Petrol Powered Pressure Washers
User Manual Introduction
User manual for JET-USA petrol powered pressure washers.
Safety Precautions
General Work Area Safety
Guidelines for safe operation in the work area.
Personal Safety Measures
Essential personal safety measures to prevent injury.
Pressure Washer Operation Safety
Safety advice specific to operating pressure washers.
Fuel Safety and Hazard Warnings
General Fuel Safety
Precautions for handling and storing petrol/fuel safely.
General Service Information
Advice on equipment servicing and maintenance.
Critical Danger Alerts
Urgent warnings about hazardous situations and engine exhaust.
Maintenance and Servicing
Maintenance Schedule
Recommended service intervals for optimal machine performance.
Transportation and Storage Guidelines
Guidelines for safely moving and storing the pressure washer.
Troubleshooting and Specifications
Common problems, solutions, and technical details of the machine.
Pumps, Hoses, and Fittings
Pump Types and Features
Description of sealed and non-sealed pump types and their characteristics.
Hose and Fitting Connections
Instructions for connecting hoses and using various fittings.
Connecting Components
Using Connectors
How to connect threaded collar and quick-connect fittings.
Nozzle Selection and Use
Information on different nozzles and their spray patterns for cleaning.
Detergent System Operation
Detergent System Assembly
Steps for assembling the detergent tank, tube, and cap.
Before Use Checklist
Engine Oil and Air Filter Checks
Ensuring adequate engine oil and checking the air filter.
Fueling and Pump Oil Checks
Instructions for fueling and verifying pump oil level.
Pump and Hose Connections
Pump Breather Installation
Installing the vent/breather cap on non-sealed pumps.
High-Pressure Hose Assembly
Connecting high-pressure hoses, lance, and fittings securely.
Water Supply Connection
Mains Water Supply Setup
Connecting to a standard garden hose and mains water supply.
Drawing Water from Reservoir
Procedure for using the machine to draw water from a suitable reservoir.
Engine Starting and Stopping
Manual/Pull Starting Procedure
Step-by-step guide for starting the engine using the pull cord.
Engine Stopping Procedures
Methods for stopping the engine safely in normal and emergency situations.
Environmental Operating Conditions
Altitude Considerations
Adjustments needed for operating the engine at high altitudes.
Temperature Effects on Oil
How ambient temperature affects engine oil and selection.
Pressure Washer Operation
Using the Lance for Spraying
How to operate the lance trigger and lock for spraying and stopping.
Scheduled Maintenance
Maintenance Schedule Overview
Table outlining recommended maintenance tasks and intervals.
Engine Oil Maintenance
Checking and Changing Engine Oil
Procedure for checking and changing the engine oil level.
Air Filter Maintenance
Air Filter Care and Replacement
Steps for inspecting, cleaning, or replacing the air filter element.
Spark Plug Maintenance
Spark Plug Care and Replacement
Procedures for checking, adjusting gap, and replacing the spark plug.
Pump Oil Maintenance (Non-Sealed)
Checking and Changing Pump Oil
Steps for checking and changing oil in non-sealed pump models.
Strainer Maintenance
Water Inlet and Detergent Strainer Care
Instructions for inspecting, cleaning, and replacing strainers.
Fuel Strainer Maintenance
Fuel Strainer Care and Replacement
Procedure for inspecting, cleaning, and replacing the fuel strainer.
Transportation and Storage
Preparing for Transport and Storage
Steps to prepare the machine for safe transport or short-term storage.
Long Term Storage Procedures
Detailed steps for preparing the machine for long-term storage.
Need help?
Do you have a question about the MX400 and is the answer not in the manual?
Questions and answers