Adding A New Quarantine Rule; Performance; Transport Agent - ESET MAIL SECURITY 4 User Manual

You can specify the message quarantine address in the
Common message quarantine field (e.g.
main_quarantine@company.com). You can also use the
Microsoft Exchange Server 2007/2010 internal quarantine
system by leaving this field blank and choosing
Quarantine message to the mail server system
quarantine (if defined by administrator) from the drop-
down menu at the bottom. Mails are then delivered to
quarantine by Exchange's internal mechanism using its
own settings.
In the Message quarantine by recipient field, you can
define message quarantine mailboxes for multiple
recipients. Every quarantine rule can be enabled or
disabled by selecting or deselecting the check box in its
row.
NOTE: You can also use system variables when
administering the message quarantine (for example: %
PATH%).
4.1.3.1

Adding a new quarantine rule

Enter the desired Recipient's email address and the
desired Quarantine email address in the appropriate
fields.
If you want to delete an email message addressed to a
recipient who does not have a quarantine rule applied,
you can select the Delete message option in the
Message intended for non-existing message
quarantine pull-down menu.
4.1.4

Performance

In this section, you can define a folder in which to store
temporary files to improve program performance. If no
folder is specified, ESET Mail Security will create
temporary files in the system's temporary folder.
NOTE: In order to reduce the potential I/O and
fragmentation impact, we recommend placing the
Temporary folder on a different hard drive than the one
on which Microsoft Exchange Server is installed. We
strongly recommend that you avoid assigning the
Temporary folder to removable media such as floppy
disk, USB, DVD, etc.
NOTE: You can use system variables (e.g., %SystemRoot%
\TEMP) when configuring Performance settings.
4.1.5

Transport Agent

In this section, you can set up automatic startup of the
transport agent as well as the agent loading priority. On
Microsoft Exchange Server 2007 and later, it is only
possible to install a transport agent if the server is in one
of two roles: Edge Transport or Hub Transport.
NOTE: Transport agent is not available in Microsoft
Exchange Server 5.5 (VSAPI 1.0).
In the Agent priority setup menu, you can set the
priority of ESET Mail Security agents. The agent priority
number range depends on the version of Microsoft
Exchange Server (the lower the number, the higher the
priority).
Write spam confidence level (SCL) to the header of
15