Related Manuals for ProFurl NC 42
Summarization of Contents
Drum Height Determination
Temporarily Fit Drum Mechanism
Temporarily fit the drum mechanism to adjust its height above the deck.
Original Rigging Screw Assembly
Assembly with Eye and Toggle
Steps for assembling with a removable pin eye and toggle.
Lower Mechanism Installation Sequences
Drum Height Options
Guide to selecting sequences based on drum height and terminal type.
Fitting Method
Cutting Extrusions to Length
Steps to measure and cut extrusions to the required length.
Lower Mechanism Assembly
A1 Assembly
Step-by-step guide for the A1 assembly of the lower mechanism.
Lower Mechanism Assembly - Additional Steps
A2 Assembly
Step-by-step guide for the A2 assembly of the lower mechanism.
Fitting Over a Rigging Screw
Instructions for fitting the mechanism onto a rigging screw.
Internal Rigging Screw Cylinder Fitting
C&R Model A1 Assembly
Specific A1 assembly steps for C&R models with an internal rigging screw.
Rigging Screw Adjustment
With Long Link Plates
Procedure for adjusting the rigging screw when using long link plates.
Rigging Screw Adjustment
With Internal Rigging Screw Cylinder
Procedure for adjusting the rigging screw with an internal cylinder.
Cutting Extrusions to Length
Measure and Calculate Length
Steps to measure the mechanism on the stay and calculate the total extrusion length.
Drilling and Fitting Wrapstop
Wrapstop Installation on Stay
Procedure for drilling and attaching the wrapstop onto the stay cable.
Fitting the Extrusions
Upper Bearing Holder Installation
Guide to installing the upper bearing holder for the extrusions.
Extrusion and Coupling Assembly
Joining Extrusions
Steps for connecting multiple extrusions using couplings.
Lower Extrusion & Bearing Holder
Instructions for attaching the lower extrusion and its bearing holder.
Halyard Swivel Installation
Fitting the Halyard Swivel
Detailed steps for mounting the halyard swivel.
Feeder Installation (Models C-R)
Fitting the Feeder
Specific instructions for installing the feeder on C-R models.
Lower Extrusion Attachment
Securing to Drum Mechanism
How to securely attach the lower extrusion to the drum mechanism.
Onboard Installation
Fitting the Reefing Line
Guide to installing the reefing line for various models.
Sail Hoisting
Attaching Halyard and Hoisting
Steps for attaching the halyard and hoisting the sail.
Halyard Swivel Adjustment
Optimal Swivel Positioning
How to properly adjust the halyard swivel for optimal sail hoisting.
Rod Stay Assembly
Profurl Rod Terminal Assembly
Steps for assembling the Profurl rod terminal onto the stay.
Racing Foil Usage
Using Specific Models
Instructions for using specific models as racing foils on hollow stays.
Sail Specifications
Luff Tape Diameters
Details on luff tape diameters for different sail models.
Sail Operation Advice
Furling and Unfurling Recommendations
Recommendations for proper sail furling and unfurling procedures.
Operation Troubles
Problem Diagnosis and Remedies
Common problems encountered and their recommended remedies.
Maintenance
System Maintenance Guide
Recommended procedures for maintaining the furling system.
Need help?
Do you have a question about the NC 42 and is the answer not in the manual?
Questions and answers