Advertisement
Quick Links
ISTRUZIONI OPERATIVE
OPERATING INSTRUCTIONS
SCAMBIATORI A PIASTRE
PLATE HEAT EXCHANGERS
DECLARATION OF CONFORMITY
In comply with the Annex VII of the European Directive 2014/68/EU
We hereby declare that the pressure equipments detailed below have been
in accordance with the European Directive 2014/68/EU:
Type:
Commercial Name:
Conformity assessment
procedures followed:
Module B certificate No.
Module C2 certificate No.
Notified Body:
Responsible signature authorized established
within the European Community :
Manufacturer.
Onda S.p.A. Via Vittoria, 158 36065 Mussolente (VI) ITALY
Onda S.p.A. Via Vittoria, 158 36065 Mussolente (VI) ITALY tel. +39 0444720720
designed, manufactured and tested
Brazed Plate heat Exchanger
S06-S07-S09
S22-S22H
S11-S12-S62-S71-S82
S16-S16H
S202
S222-S222H
S404-S424-S424H-S606
MODULES B + C2
TIS-PED-MI-15-03-002622-8383
TIS-PED-MI-16-11-275908-10461
0948 TUV ITALIA SRL
TÜV SÜD Gruppe
ONDA S.p.A.
IS079 rev .12 del 21/11/2016
Advanced Heat transfer Solutions
Advertisement
Related Manuals for Onda S82
Summarization of Contents
MAXIMUM APPLICABLE CATEGORY BY MODEL
Gas Exchangers group I - Liquid group II
Table categorizing PED categories for Gas Group I / Liquid Group II exchangers.
Gas Exchangers group II - Liquid group II
Table categorizing PED categories for Gas Group II / Liquid Group II exchangers.
5. INSTALLATION
5.1 CONNECTIONS:
Describes standard and additional connections on the exchanger plates.
5.2 FILTERS:
Guidance on selecting and installing appropriate strainers for the heat exchanger.
5.3 ASSEMBLY FOR WATER-WATER APPLICATION
Instructions for connecting water-water exchangers for optimal counter-current flow.
5.4 ASSEMBLY FOR APPLICATION WITH COOLANTS
Recommendation to install exchangers for coolant applications in a vertical position.
USE OF EVAPORATOR TYPE:
Instructions for connecting circuits for evaporator type exchangers.
USE OF CONDENSATOR TYPE:
Instructions for connecting circuits for condenser type exchangers.
5.5 Protection from vibration
Recommendations for preventing damage from system vibrations.
5.6 Isolation
Guidance on isolating the exchanger depending on the application.
6. USE
FOR USE WITH COOLANTS
Specific instructions and warnings for operating with coolants, including freezing risks.
7. MAINTENANCE AND USER CHECKS
WATER CIRCUIT CLEANING:
Procedures for cleaning the water circuit, including chemical washing.
HIGHEST APPLICABLE CATEGORY OF THE PRESSURE EQUIPMENT
Scambiatori Gas Gr. I - Liquido Gr. II
Table of PED categories for Gas Group I / Liquid Group II exchangers.
Scambiatori Gas Gr. II - Liquido Gr. II
Table of PED categories for Gas Group II / Liquid Group II exchangers.
Need help?
Do you have a question about the S82 and is the answer not in the manual?
Questions and answers