Page 2
In addition, we refer to the conditions of use specified in the license contract. You can get the latest version of this manual on the Internet at the Hirschmann product site (www.hirschmann.com). Hirschmann Automation and Control GmbH Stuttgarter Str.
Supply voltage Operate the ACA21-.../ACA22-... storage medium with listed Hirschmann Industrial Ethernet host devices via their USB interface exclusively. National and international safety regulations Verify that the electrical installation meets local or nationally applicable safety regulations.
WARNING - EXPLOSION HAZARD! DO NOT DISCONNECT EQUIPMENT UNLESS POWER HAS BEEN SWITCHED OFF OR THE AREA IS KNOWN TO BE NON-HAZARDOUS. WARNING - EXPLOSION HAZARD! SUBSTITUTION OF ANY COMPONENTS MAY IMPAIR SUITABILITY FOR DIVISION 2. To be supplied by a Class 2 power supply or isolated Low Voltage Limited Energy (LVLE).
Page 5
Control Drawing 000163850DNR Ordinary Location, Class 1, Division 2 Non-Hazardous Area, Groups A, B, C, D Non-Explosive Atmosphere Hazardous Location Zone 2 Explosive Atmosphere USB Power supply contacts: Ground: pin 4 ACA21-USB or ACA22-USB devices with nonincendive field wiring parameters. U in : pin 1 The USB contacts pin 1 and pin 4 are depen- 1 2 3 4...
Page 6
Make sure that the Entity Parameters of the host device meet the following require- ments: *) V oc or U o ≤ 5.5 V l sc or l o ≤ 1.25 A C a or C > 6.0 μF L a > 400 nH Applied standards: ANSI/ISA 12.12.01-2011 (Hazardous Locations) EN 60079-0: 2009 (Zone 2, directive 94/9/EC)
Page 7
In accordance with the above-named EU directive(s), the EU conformity declaration will be at the disposal of the relevant authorities at the following address: Hirschmann Automation and Control GmbH Stuttgarter Str. 45-51 72654 Neckartenzlingen Germany Tel.: +49 1805 141538 The product can be used in living areas (living area, place of business, small business) and in industrial areas.
Description The ACA21-.../ACA22-... storage medium is for saving and updating configuration data and software of the Hirschmann Industrial Ethernet host devices. USB compatibility of the storage medium: ACA21-.../ACA22-... Storage medium Software ACA21-... Classic compatible HiOS Enabling the compatibility mode on the device is required.
Figure Function — − Data Ground (GND) + Data Table 2: Pin assignment of the M12 plug Operation Transferring the current configuration data on the storage medium You have the option of transferring the current configuration of your connected device via the graphical user interface or the Command Line Interface on the ACA21-.../ACA22-...
Technical Data General technical data Order numbers ACA21-USB (EEC) 943 271-003 ACA22-USB (EEC) 942 124-001 ACA21-M12 (EEC) 943 913-003 ACA22-M12 (EEC) 942 125-001 USB standard ACA21-USB (EEC) USB 1.1 ACA21-M12 (EEC) ACA22-USB (EEC) USB 2.0 ACA22-M12 (EEC) Storage ACA21-USB (EEC) 64 MB capacity ACA21-M12 (EEC)
Page 11
If your device has a shipping approval according to Germanischer Lloyd, you find the approval mark printed on the device label. You will find out whether your device has other shipping approvals on the Hirschmann website under www.hirschmann.com in the product information.
E-mail: inet-ap@belden.com Hirschmann Competence Center The Hirschmann Competence Center is ahead of its competitors on three counts with its complete range of innovative services: Consulting incorporates comprehensive technical advice, from system evaluation through network planning to project planning.
Need help?
Do you have a question about the ACA22-USB (EEC) and is the answer not in the manual?
Questions and answers