Related Manuals for Millimar C 1240
Summarization of Contents
Disposal and Warranty Voidance
Voided Warranty Conditions
Conditions that will invalidate the instrument's warranty, such as improper storage temperatures.
Initial Commissioning and Navigation
Setting Up Basic Parameters
Covers language, units, and probe zeroing during initial setup.
Navigating the Function Catalog
Explains how to move through and use the instrument's function and parameter catalog.
Instrument Control Elements
Display and Keypad Overview
Details the instrument's display screen and keypad layout.
Core Navigation Keys
Explains the operation of MENU, DATA, MASTER, and ESC keys for navigation.
Measurement and Setup Keys
Explains the function of TEST and START keys for measurement and setup.
Special Function Keys
Details the functionality of RANGE and the programmable SELECT keys.
Status Lamps and Indicators
Interprets the meaning and color indications of the status lamps.
Instrument Connections and Interfaces
Serial RS 232 and Parallel I/O Interfaces
Describes the functionality of serial and parallel interfaces for data transfer.
Power Supply and On/Off Switch
Information on connecting power and operating the on/off switch.
Basic Settings Configuration
Display Language, Contrast, and Units
How to set display language, contrast, and measurement units (mm, µm, inch).
Resolution and Feature Display
Configuring display resolution and the number of features shown.
Aligning Probe Sensitivity
Calibrating Channels and Aligning Sensitivity
Steps for channel calibration and aligning C2 probe sensitivity to C1.
Feature Calculation Settings
Correction Factors and Formulas
How to apply correction factors and select formulas for feature calculation.
Master Measurement Procedures
Master Measurement Types and Values
Selecting master measurement type and entering nominal values.
Performing Master Measurements
Step-by-step guides for one-point and two-point master measurements.
Tolerances and Limit Settings
Tolerance, Warning, and Plausibility Limits
Setting tolerances, warning limits, and plausibility limits for measurements.
Status Lamp Color Configuration
Setting the colors for status lamps indicating limit status.
Measurement Recording and Sequencing
Filter Parameters and Measuring Sequence
Configuring signal filtering and the order of measurement operations.
Operating Modes and Start Delay
Using NORMAL/AUTOMATIC modes and setting a start delay.
Performing Specific Measurements
Aggregate, Differential, and Radial Run-out
Step-by-step guides for performing aggregate, differential, and radial run-out measurements.
Serial Interface (RS 232) Communication
Serial Interface Configuration
Configuring serial communication parameters: protocol, format, handshake, rate, transfer.
PC Connection via Zero-Modem Cable
Wiring diagram and instructions for PC connection using a zero-modem cable.
Parallel Interface (I/O) Usage
Digital Control Input/Output Configuration
Configuring digital inputs and outputs for controlling instrument functions.
Analog Output Configuration
Setting up the analog output for transmitting measurement data and sensitivity.
Support and Warranty Information
Mahr Contact Information
Provides contact details for Mahr GmbH Esslingen for support.
Warranty Conditions
Outlines the terms and conditions of the instrument's warranty.
Need help?
Do you have a question about the C 1240 and is the answer not in the manual?
Questions and answers