Table of Contents
Advertisement
GARAGE DOOR OPENER
Models 9357·9367
For Residential Use Only
Owner's Manual
Please read this manual and the enclosed safety materials carefully!
Fasten the manual near the garage door after installation.
The door WILL NOT CLOSE unless The safety is connected and properly aligned.
Periodic checks of the opener are required to ensure safe operation.
The model number label is located on the left side panel of your opener
www.seaside.net.cn
LTD.
TABLE OF CONTENTS
DALIAN SEASIDE DOOR CONTROLLING SYSTEM CO.,
2-6
7-9
10-18
19-20
21-22
23-24
24-28
29
30
30
30
31
31
32-33
34
1
Advertisement
Table of Contents
Related Manuals for Seaside 9367
Summarization of Contents
Introduction
Safety Symbol and Signal Word Review
Explains safety symbols and signal words used in the manual.
Check Your Garage Door
Procedure to check the garage door for balance and binding before installation.
Overview and Carton Inventory
Garage Door Opener Assembly
Diagram showing all parts included in the garage door opener assembly kit.
Included Accessories
Wall Control Panel
Image and identification of the wall-mounted control unit.
Remote Control
Image and identification of the remote control transmitter.
Wall Control Hardware
Identification of hardware for mounting the wall control panel.
Installation
Determine Header Bracket Location
Guidance on selecting the correct mounting position for the header bracket.
Position Garage Door Opener
Hang Garage Door Opener
Steps for safely hanging the opener unit from structural supports.
Install Wall Control
Wall Control Installation
Steps for mounting and wiring the wall-mounted door control panel.
Install Photo Eye Safety System
Introduction
Overview of the photo eye safety system and its importance.
Power Connection
Connect Power
Basic instructions for connecting the opener to a power source.
Power Connection Options
Typical Wiring
Standard method for connecting the opener to a grounded electrical outlet.
Permanent Wiring
Procedure for hardwiring the opener to the electrical system per local codes.
Align Safety Reversing Sensors
Instructions for ensuring the safety reversing sensors are properly aligned.
Advanced Settings
Open Position Force Sensitivity
Adjusting the force required for the door to stop or reverse in the open direction.
Close Position Force Sensitivity
Test the Photo Eye Safety System
Verifies the photo eye safety system prevents the door from closing on obstructions.
Operation
Important Safety Instructions
Critical safety guidelines for operating the garage door opener.
Wall Control Operations
Using the Wall Control
How to use the buttons and features of the wall-mounted control panel.
Remote Control Programming
Steps to program a remote control to operate the garage door opener.
Erase Memory
Procedure to clear all previously programmed remote controls.
Troubleshooting
Diagnostic Chart
Table listing error codes, symptoms, causes, and resolutions for common opener issues.
Need help?
Do you have a question about the 9367 and is the answer not in the manual?
Questions and answers