Related Manuals for Canaline 52
Summarization of Contents
Engine Identification and Information
Engine Information Fields
Fields to record engine type, serial number, and installation date for dealer reference.
Critical Safety Precautions
Power Take-Off and Exhaust Safety
Safety measures for rotating parts, hot exhaust systems, and exhaust gas handling.
Fuel and Oil Safety Measures
Precautions for fuel lines, supply connections, and preventing skin contact with oil.
Additional Engine Safety Advice
Scalding and Lifting Safety
Warnings about hot coolant and safe engine lifting practices.
General Declarations and Compliance
Statements on machinery compliance and owner's responsibility for safety requirements.
Engine Starting and Stopping Procedures
Pre-Start Engine Checks
Essential checks to perform before attempting to start the engine.
Canaline Control Panel Indicators
Engine Stopping Procedure
Instructions for stopping the engine and securing the vessel for extended periods.
Engine Operation Monitoring
Cooling System Checks During Operation
Procedures for checking and maintaining the engine's cooling system while running.
Immediate Engine Shutdown Conditions
Critical conditions that necessitate immediate engine shutdown for safety.
Fuel and Lubricant Specifications
Diesel Fuel Selection Criteria
Guidelines for choosing appropriate diesel fuel based on quality standards and criteria.
Fuel System Maintenance and Contamination
Biocides and Smoke Suppressant Additives
Information on using fuel biocides and reasons to avoid smoke suppressant additives.
Engine Oil and Coolant Recommendations
Engine Oil Grade Selection
Specific engine oil specifications and viscosity grades recommended for Canaline engines.
Comprehensive Maintenance Schedule
Daily and 8-Hour Maintenance Checks
Essential checks to perform daily or every 8 hours of engine operation.
50-Hour Initial Service
Key tasks for the initial 50-hour service, including oil and filter changes.
200-Hour/Annual Maintenance
Maintenance actions required every 200 hours of operation or annually.
400-Hour Service Tasks
Maintenance tasks for the 400-hour service, including filter and antifreeze replacement.
Importance of First Service
Emphasis on the critical nature and cost implications of the first engine service.
Checking Engine Oil Level Procedure
Oil Change and Filter Maintenance Notes
Notes on oil mixing, and recommended timing for oil and filter changes.
Gearbox Oil Level Check
PRM125D Gearbox Oil Check
Specific instructions for checking the oil level on the PRM125D gearbox.
Freshwater Cooling System Filling
Cooling System Safety Warnings
Important safety warning regarding hot coolant and pressure cap removal.
Engine Wiring Diagrams and Battery Information
Starter Battery Capacity Recommendation
Recommendation for minimum starter battery capacity for Canaline engines.
Starter Battery Cable Sizing Guidelines
Guidelines for selecting appropriate starter battery cable sizes based on length.
Marine Engine Installation Procedures
Anti-Vibration Mount Installation Details
Instructions for fitting and adjusting engine anti-vibration mounts for optimal performance.
Engine Alignment and Exhaust System Guidelines
Exhaust System Design Recommendations
Guidance on exhaust back pressure limits, silencer selection, and piping sizes.
Calorifier Placement and Engine Idle Speed
Adjusting Engine Idle Speed
Method for adjusting the engine idle speed for optimal operation and hydraulic pressure.
Control Cable Installation and Storage
Engine Laying-Up Procedures
Instructions for storing the engine to prevent deterioration during extended idle periods.
Parts Availability and Engine Servicing
Professional Engine Servicing Advice
Advice on professional engine servicing and locating qualified service engineers.
Warranty Terms and Conditions
Owner's Obligations and Defect Reporting
Owner's responsibilities for maintenance, registration, and prompt defect reporting.
Warranty Coverage, Exclusions, and Procedures
Details warranty periods, covered items, exclusions, and the claims process.
Warranty Period and Liability Limitations
Specifies warranty duration and limitations of Engines Plus Ltd's liability.
Need help?
Do you have a question about the 52 and is the answer not in the manual?
Questions and answers