Related Manuals for Allen-Bradley 1794-OF4I
Summarization of Contents
Preface
Using this Manual
Explains how to use the manual and its structure.
Manual Organization
Details the structure and chapters of the manual.
Chapter 1: Overview of FLEX I/O and your Analog Modules
The FLEX I/O System
Describes the FLEX I/O system and its components.
Types of FLEX I/O Modules
Lists and describes the available FLEX I/O analog modules.
Chapter 2: How to Install Your Analog Module
Power Requirements
Specifies the power requirements for installing the module.
Connecting Wiring for the Analog Modules
Provides instructions on how to wire the analog modules.
Chapter 3: Module Programming
Block Transfer Programming
Explains the block transfer communication method.
Sample Programs for FLEX I/O Analog Modules
Provides sample programming examples for PLC-3, PLC-5, SLC-5.
Chapter 4: Writing Configuration to and Reading Status from Your Module with a Remote I/O Adapter
Configuring Your Analog Module
Explains how to configure module features like range and data type.
Reading Data From Your Module
Describes how to retrieve status and data from the module.
Chapter 5: Communication and I/O Image Table Mapping with the DeviceNet/ControlNet Adapter
Polled I/O Structure
Explains the structure of polled I/O data.
Mapping Data into the Image Table
Explains how data is mapped into the image table.
Chapter 6: Input, Output, Status and Configuration Files for Analog Modules when used with ControlNet
Polled I/O Structure
Details the structure of polled I/O data for ControlNet.
Safe State Data
Describes how safe state data is applied during faults.
Chapter 7: Calibrating Your Module
When and How to Calibrate Your Isolated Analog Module
Explains calibration necessity, methods, and timing.
Offset Calibration for Inputs
Details the procedure for calibrating input offsets.
Appendix A: Specifications
Filter Response for 150Hz, 300Hz and 600Hz Conversion
Provides filter response graphs for different conversion rates.
Need help?
Do you have a question about the 1794-OF4I and is the answer not in the manual?
Questions and answers