Related Manuals for Hidrion H200
Summarization of Contents
Safety Information
General Safety Precautions
Guidelines for installation, use, and maintenance, including user capabilities and child supervision.
Product Recycling and Disposal
Information on correct disposal of the product as electrical waste according to EU directive.
Assembly Instructions
Hidrion Electrical Switchboard Installation
Instructions for mounting the HIDRION electrical switchboard to the wall near the pump switchboard.
Hidrion Ioniser Installation
Guidance on installing the HIDRION ioniser in the piping system after the pump and before the filter.
Water Chemistry Parameters
pH Control
Explains pH as a measure of water acidity/neutrality/basicity and its importance for water balance and equipment.
Alkalinity Control
Defines alkalinity as resistance to pH deviation and its optimal range (80-120 ppm) for balanced water.
Copper Monitoring
Monitors free copper (0.3-0.5 ppm), its interaction with pH, and provides instructions for using the copper testing kit.
Chlorine Management
Details HIDRION's reduction of chlorine consumption and recommendations for weekly tri-chlorine dosage based on pool volume.
Cyanuric Acid Levels
Advises keeping cyanuric acid concentration below 75 mg/l to maintain chlorine efficiency and prevent irritation.
Useful Tips
Water Conductivity and Mineral Content
Explains the need for minerals in water for ionisation and how to add salt if conductivity is too low.
Electrode Cleaning
Procedure for cleaning insulated electrodes, typically due to hard water and high pH, to restore copper production.
Electrode Replacement
Information on contacting the manufacturer or visiting the website for purchasing replacement electrode kits.
Need help?
Do you have a question about the H200 and is the answer not in the manual?
Questions and answers