Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for BK Precision 9805
Summarization of Contents
General Information
Product Overview
Overview of B&K Precision 9800 series AC power sources, features, and models.
Package Contents
Lists all items included in the shipping container for the AC power source.
Product Dimensions
Provides physical dimensions and rackmount information for 9801 and 9803/9805 models.
Front Panel Overview
Introduces the front panel layout and key components of the 9801 model.
Front Panel Description
Details the functions of each component on the 9801 front panel.
Rear Panel Overview
Illustrates and labels the connectors and ports on the rear panel of the 9801 model.
Rear Panel Description
Details the function of each connector and port on the rear panel.
Display Overview
Shows the VFD display layout and identifies key indicators and readouts.
Display Description
Explains the meaning of each indicator and segment on the VFD display.
Getting Started
Input Power and Fuse Requirements
Details input voltage requirements, fuse specifications, and selection for 9801, 9803, and 9805 models.
Fuse Requirements
Specifies the correct fuse types, ratings, and quantities for different voltage settings.
Fuse Replacement
Step-by-step instructions for replacing fuses in the 9801 and 9803/9805 models.
Input Connections
Guide for making AC input connections for models 9803 and 9805.
Output Connections
Describes how to connect loads to the AC output sockets and terminal blocks.
Preliminary Check
Steps to verify the power supply is ready for use, including self-test procedures.
Output Check
Procedures to verify basic voltage and frequency output with no load connected.
Check Model and Firmware Version
Instructions to verify the instrument's model number and firmware version.
Front Panel Operation
Menu Options
Outlines the menu structure and options for configuring the power supply settings.
How to Access the Menu
Instructions on navigating and selecting options within the instrument's menu system.
Configure Voltage and Frequency Output
Guides users on setting output voltage, range, frequency, and phase angle.
Setting Voltage
How to set the output voltage using the rotary knob, arrow keys, or numeric keypad.
Output Range
Explains how to select between High and Auto output ranges for voltage and current.
Setting Frequency
Details the procedure for setting the output frequency within the specified range.
Setting Phase Angle
Describes how to adjust the start and stop phase angle for AC output.
SYSTEM Menu
Covers system-level configurations like factory resets and power-on settings.
Restore Factory Default Settings
Steps to reset all instrument settings to their original factory defaults.
CONFIG Menu
Details settings for voltage, frequency, and current limits, and protection features.
Voltage Limits
How to define minimum and maximum voltage limits to constrain settings.
Frequency Limits
How to define minimum and maximum frequency limits for settings.
Current Protection
Configuration of RMS and peak current protection points with delay options.
External BNC
Explains configuring the BNC port for triggers, output control, or synchronization.
Dimmer Output Simulation
How to use the dimmer function for phase cutting and voltage adjustment.
List Mode
Covers programming sequences, storing steps, and running list programs.
Configure List Setting
Setting up the list mode trigger source and start method.
Edit List File
Defining parameters for list steps including voltage, frequency, and PLD settings.
Sweep Mode
Guides on creating and running voltage and frequency sweep outputs.
Edit Sweep File
Parameters for configuring voltage, frequency, and time steps for sweeps.
Measured Power Output and Settings Display
Explains how to view measured power and toggle display parameters.
Key Lock
How to enable or disable the front panel key lock to prevent accidental changes.
Remote Operation
Interface Connection
Details on connecting the instrument via USB, RS-232, LAN, and GPIB interfaces.
Remote Commands
Information on SCPI and instrument-specific commands for remote control.
Troubleshooting Guide
General
Common questions and answers regarding power-up issues and display voltage.
Remote Control
Troubleshooting tips for unresponsive remote commands over USB/RS-232.
Need help?
Do you have a question about the 9805 and is the answer not in the manual?
Questions and answers