Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for BK Precision 9803
Summarization of Contents
Safety Summary
Category Ratings
Defines IEC 61010 safety category ratings (I, II, III, IV) and their implications for electrical measurements.
Electrical Power and Grounding
Specifies power source requirements and grounding procedures for safe operation.
Environmental and Damage Precautions
Warns against operating in hazardous atmospheres and handling damaged instruments.
Instrument Handling and Cleaning
Provides instructions for cleaning and warns against touching live circuits or using for life support.
Maintenance and Usage Safety
Covers fuse replacement, servicing, cooling fan maintenance, and wire gauge selection.
Compliance Statements
WEEE Disposal Information
Details the European Union's directive for disposing of electronic waste.
CE Declaration of Conformity
Regulatory Compliance Standards
Lists the Low Voltage Directive and EMC Directive standards met by the product.
General Information
Product Overview
Introduces the B&K Precision 9800 series AC power sources and their features.
Package Contents
Lists all items included in the product package upon delivery.
Product Dimensions (9801)
Provides detailed physical dimensions for the 9801 model.
Product Dimensions (9803/9805)
Provides detailed physical dimensions for the 9803 and 9805 models.
Front Panel Overview
Front Panel Diagram
Illustrates the layout of the front panel controls and indicators for the 9801 model.
Front Panel Control Descriptions
Explains the function of each button, display element, and control on the front panel.
Rear Panel Overview
Rear Panel Diagram
Illustrates the layout of the rear panel connectors and components for 9801 and 9803/9805 models.
Rear Panel Port Descriptions
Details the function of each port and connector on the rear panel.
Display Overview
Display Diagram
Shows a diagram of the VFD display with numbered sections.
Display Element Meanings
Defines the various indicators and display elements shown on the VFD.
Getting Started
Input Power and Fuse Requirements
Specifies input voltage, frequency requirements, and fuse types for the instrument.
Fuse Replacement Procedures
Provides step-by-step instructions for replacing fuses in the 9801 and 9803/9805 models.
AC Input Connections
Details how to make AC input connections for models 9803 and 9805.
AC Output Connections
Explains how to connect loads to the AC output terminals for 9801 and 9803/9805 models.
Preliminary Power-On Checks
Outlines steps to verify the power supply is ready for operation, including self-test.
System Self-Test and Output Check
System Self-Test Procedure
Describes the instrument's self-test process and expected display upon completion.
Voltage and Frequency Output Check
Details how to verify basic voltage and frequency output without a load.
Model and Firmware Version Check
Explains how to check the instrument's model and firmware version via the menu system.
Front Panel Operation
Menu Options and Navigation
Introduces the menu structure and how to navigate through settings and parameters.
Configure Voltage, Frequency, and Phase
Guides users on setting output voltage, frequency, and phase angles via the front panel.
Output Range Selection
Explains how to select between High and Auto output ranges for voltage and current.
SYSTEM Menu Functions
Details operations within the SYSTEM menu, including factory reset and power-on settings.
SYSTEM Menu - Trigger and Communication
Covers configuring trigger sources and setting up communication interfaces (RS-232).
SYSTEM Menu - Communication Setup
Details setup for USBTMC and LAN communication interfaces.
SYSTEM Menu - GPIB and Settings Management
Explains GPIB configuration and how to save/recall instrument settings.
CONFIG Menu - Voltage and Frequency Limits
Guides on setting minimum and maximum limits for voltage and frequency.
CONFIG Menu - Current Protection and BNC Settings
Details current protection settings and configuration of the external BNC port.
Dimmer Output Simulation
Explains how to use the dimmer function for phase cutting and voltage control.
List Mode Configuration
Covers configuring list settings, including trigger sources for sequence execution.
Editing List Files
Details how to create and edit list files, including step parameters like voltage, frequency, and PLD.
Running List Programs
Guides on recalling and running stored list programs, including trigger configuration.
Power Line Disturbance Simulation (PLD)
Explains how to use PLD simulation within list mode to create waveforms like surges and dropouts.
Sweep Mode Overview
Introduces sweep mode for creating voltage and frequency sweeps and their applications.
Editing Sweep Files
Details how to configure parameters for voltage and frequency sweeps.
Running Sweep Files
Guides on recalling and executing stored sweep files.
Power Output Display and Key Lock
Explains how to view different power measurements and enable/disable the front panel key lock.
Remote Operation
Interface Connections and Setup
Details how to connect and configure USB, RS-232, LAN, and GPIB interfaces for remote control.
Remote Commands and Control
Covers SCPI and instrument-specific commands for remote operation.
Troubleshooting Guide
General Troubleshooting Q&A
Addresses common issues like powering up, voltage display discrepancies, and setting limits.
Remote Control Troubleshooting
Provides solutions for issues related to remote command response and waveform distortion.
Technical Specifications
AC Input and Output Specifications
Lists detailed specifications for AC input and AC output parameters like voltage, current, and power.
Programming and Measurement Specifications
Details specifications for programming functions like voltage/frequency resolution and measurement accuracy.
Service and Warranty Information
Service Procedures and Contact
Outlines procedures for warranty and non-warranty service, including return instructions.
Limited Two-Year Warranty Details
Explains the terms, exclusions, and duration of the product's two-year warranty.
Need help?
Do you have a question about the 9803 and is the answer not in the manual?
Questions and answers