Related Manuals for Kubota B7100HST
Summarization of Contents
IMPORTANT NOTICE / NOTICE IMPORANTE
CAUTION
General safety warnings and precautions for equipment operation.
PRECAUTIONS
Important safety advice for equipment operation and assembly.
FOR SAFETY OPERATION / CONSIGNES DE SECURITE
General Safety Precautions
Essential safety rules to prevent accidents and operational troubles.
Other Safety Precautions
Additional safety guidelines for operation and maintenance.
1. REQUESTING FOR DEALERS SERVICE
Dealer Service Information
Information on contacting dealers for service and parts.
4.2 CONTROLS
Throttle Lever
Lever for adjusting engine speed.
Stop the Engine
Procedure to shut down the engine safely.
Hydraulic Control Lever
Controls implement lift and lower functions.
High-Low Gear Shift Lever
Selects transmission speed range for tractor operation.
Speed Control Pedal
Adjusts forward and reverse travel speed.
4. INSTRUMENT PANEL AND CONTROLS
4.1 SWITCHES
Covers key switch, lighting, signaling, starting, and monitoring controls.
4.3 HYDRAULIC POWER TAKE OFF
Directional Control Valve
Controls hydraulic oil flow to implements.
Hydraulic Block
Used for simultaneous 3-point link operation.
5. OPERATING INSTRUCTIONS
5.1 OPERATING THE ENGINE
Procedures for starting, stopping, and operating the engine.
5.2 OPERATING THE TRACTOR
Safety rules, cautions, and operation of speed control devices.
5.3 CHECK DURING DRIVING
Checks for coolant, oil pressure, fuel, and exhaust during operation.
5.4 DIRECTIONS FOR OPERATING
Guidelines for using differential lock and handling urgent stops.
6. MAINTENANCE
6.1 DAILY CHECK
Pre-start checks for tractor condition.
6.2 LUBRICANTS
Recommended oils and capacities for various tractor components.
6.3 MAINTENANCE CHECK LIST
Scheduled maintenance tasks and intervals.
7. CHECK AND MAINTENANCE
7.1 FUEL
Fuel checking, refueling, bleeding, and filter maintenance.
7.2 ENGINE OIL
Engine oil level checks, replenishment, and filter changes.
7.3 TRANSMISSION OIL
Transmission oil level checks, replenishment, and filter changes.
7.4 CHANGING FRONT DIFFERENTIAL CASE OIL (4WD)
Procedure for changing front differential case oil.
7.5 CHANGING FRONT WHEEL GEAR CASE OIL (RIGHT AND LEFT) (4WD)
Procedure for changing front wheel gear case oil.
7.6 STEERING GEAR BOX OIL
Procedure for checking and replenishing steering gear box oil.
7.7 OILING AND GREASING POINTS BEFORE STARTING
Lubrication points for pivot pins and shafts before operation.
7.8 RADIATOR
Cooling water, hose, and system maintenance procedures.
Anti-Freeze
Information on using and maintaining antifreeze.
Checking and Cleaning Radiator and Oil Cooler for Preventing from Flooding
Checking and cleaning cooling system components.
7.9 TIRE PRESSURE
Recommended tire inflation pressures for farm and turf.
7.10 AIR CLEANER
Procedures for cleaning and maintaining the air cleaner.
7.11 BATTERY
Battery maintenance, charging, and storage guidelines.
8. ADJUSTMENTS
8.1 BELT TENSION
Adjusting fan and dynamo drive belt tension.
8.2 CLUTCH
Clutch adjustment for play and travel.
8.3 BRAKE
Brake pedal travel and play adjustment.
8.4 REVERSE SPEED
Adjusting the maximum reverse speed.
8.5 STEERING WHEEL
Adjusting steering wheel play.
8.6 IMPLEMENT LOWERING SPEED
Adjusting the speed at which implements lower.
8.7 IMPLEMENT LIFTING AND LOWERING LIMITS
Adjusting implement upper and lower travel limits.
8.8 REAR WHEEL TREAD
Adjusting rear wheel track width.
8.9 EXHAUST PIPE WITH MUFFLER
Adjusting the exhaust pipe position.
9. TROUBLESHOOTING
9.1 ENGINE TROUBLESHOOTING
Troubleshooting engine starting, power, stalling, and exhaust issues.
9.2 TRACTOR TROUBLESHOOTING
Troubleshooting issues with tractor movement and operation.
9.3 BATTERY TROUBLESHOOTING
Troubleshooting battery starting, charging, and terminal issues.
10. LONG-TERM STORAGE
Storage Procedures
Guidelines for storing the tractor for extended periods.
11. THREE-POINT HITCH
11.1 THREE-POINT HITCH ADJUSTMENT
Adjusting top link, lift rod, and check chain.
12. OPTIONS
Upright Muffler (66711-82511)
Converting the horizontal muffler to an upright one.
Need help?
Do you have a question about the B7100HST and is the answer not in the manual?
Questions and answers