Table of Contents
Advertisement
installation and
servicing
Your Ideal installation and servicing guide
See reverse for
Models F80, F120, F160
& F200, F240, F280
When replacing any part on this appliance, use only spare parts that you can be
assured conform to the safety and performance specification that we require. Do not
use reconditioned or copy parts that have not been clearly authorised by Ideal Boilers.
August 2009 UIN 202441 A06
xtra
users guide
xtra
Advertisement
Table of Contents
Related Manuals for IDEAL F280
Summarization of Contents
General Information and Safety
Performance and General Data
Tables detailing boiler performance specifications and general data.
Key to Symbols
Explanation of symbols used throughout the manual for clarity.
Introduction and Safety Regulations
Overview of the boiler, safety guidelines, and relevant regulations.
Flue System Design
Guidance on flue sizing, installation, and system considerations.
Water Circulation System
Requirements and recommendations for the boiler's water circulation system.
Hydraulic Resistance
Data on pressure drop across the boiler at different flow rates.
Installation Procedures
Boiler Dimensions and Connections
Detailed measurements and connection points for the boiler.
Boiler Clearances
Recommended minimum space around the boiler for access and ventilation.
Ventilation Requirements
Guidelines for air supply and ventilation for boiler operation.
Flue and Air Duct Installation
Instructions for fitting the flue system and air intake ducting.
Electrical Connections
Wiring requirements for mains supply, external controls, and safety.
Control System Connections
How to connect central heating and hot water demand controls.
Controls Display and Operation
Understanding the boiler's display, modes, and basic functions.
Advanced Controls Access
Accessing and modifying advanced boiler parameters for setup.
Commissioning and Testing
Procedures for initial setup, testing, and final checks of the boiler.
Servicing and Maintenance
Handing Over and Routine Operation
Procedures for explaining boiler operation to the owner.
Safety Precautions During Servicing
Essential safety steps before and during maintenance work.
Servicing Schedule
Recommended service intervals and tasks for the boiler.
Casing Removal and Component Access
Steps for safely removing boiler panels to access internal parts.
Fan, Burner, and Heat Exchanger Servicing
Procedures for inspecting and cleaning key internal components.
Boiler Control Module Replacement
Steps for replacing the main control module.
Fault Finding and Troubleshooting
Preliminary Electrical Checks
Initial electrical system checks to perform before fault diagnosis.
Boiler Control Module Error Codes
List and explanation of error codes displayed by the control module.
Technical Characteristics of Temperature Sensors
Resistance values for various temperature sensors used in the boiler.
Parts and Support
Short List of Parts
Common replacement parts and their part numbers for the boiler.
Technical Training Information
Details on training courses offered by the manufacturer.
Need help?
Do you have a question about the F280 and is the answer not in the manual?
Questions and answers