Toro groundsmaster 3280 series Operator's Manual
Toro groundsmaster 3280 series Operator's Manual

Toro groundsmaster 3280 series Operator's Manual

52 in side discharge mower traction unit

Advertisement

Quick Links

Register at www.Toro.com.
Original Instructions (EN)
52in Side Discharge Mower
Groundsmaster
Series Traction Unit
Model No. 30555—Serial No. 314000001 and Up
Form No. 3383-271 Rev A
®
200, 3320 and 3280-D
*3383-271* A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the groundsmaster 3280 series and is the answer not in the manual?

Questions and answers

Summarization of Contents

Setup
Loose Parts
List of loose parts to verify shipment for setup.
Media and Additional Parts
Information on parts catalog and operator's manual.
Installing the Lift Arms
Step-by-step guide to attach lift arms to the traction unit.
Installing the Carrier Frame
Procedure to install the carrier frame onto the lift arms.
Installing the Cutting Unit
Steps to attach the cutting unit to the carrier frame.
Installing the CE Decal
Procedure to apply the decal for CE compliance.
Installing Rear Weight
Instructions for adding rear weight for specific models.
Product Overview
Specifications
Technical specifications of the mower deck.
Attachments/Accessories
Information on approved attachments and accessories.
Operation
Adjusting the Height-of-Cut
How to adjust the cutting height settings on the mower deck.
Adjusting the Rollers
Procedure to reposition rollers for specific cut heights.
Checking the Gear Box Lubricant
How to check the gear box lubricant level before operation.
Adjusting Weight Transfer
Adjusting counterbalance pressure for optimal performance.
Using the Grass Deflector
Guidelines and warnings for using the grass deflector.
Maintenance
Lubrication
Detailed instructions for lubricating various parts of the unit.
Separating the Cutting Unit from the Traction Unit
Steps to disconnect the cutting unit from the traction unit.
Servicing the Bushings in the Castor Arms
Procedure to check and replace worn castor arm bushings.
Servicing the Castor Wheel and Bearing
How to service the castor wheel and its bearing.
Checking for a Bent Blade
How to check if mower blades are bent.
Removing the Cutting Blade
Steps for safely removing mower blades.
Inspecting and Sharpening the Blade
How to inspect and sharpen mower blades.
Checking and Correcting Mismatch of Blades
How to ensure blades are properly aligned for an even cut.
Replacing the Grass Deflector
Steps to replace the grass deflector.
Adjusting the Idler Pulley
How to adjust the idler pulley for proper belt tension.
Replacing the Drive Belt
Procedure for replacing the mower drive belt.

Table of Contents