Related Manuals for Lufft WS300-UMB
Summarization of Contents
Important Pre-Use Information
Safety and Usage Guidelines
Essential safety instructions, designated use, and consequences of incorrect operation.
Product Order Information
WS Weather Station Models
Lists order numbers and measurements for WS200-UMB through WS600-UMB.
Equipment Overview
Core Measurement Sensors
Details sensors for temperature, humidity, pressure, and precipitation.
Wind, Compass, Heating, and Radiation
Describes wind sensors, compass, heating, and global radiation measurement.
Sensor Technology Illustration
Illustrates the sensor components and their locations.
Measurement Data Generation
Measurement Value Types
Details current, min/max, average, and vectorial average values.
Measurement Output Channels
Temperature, Humidity, and Pressure Output
Lists UMB channels and ranges for temperature, humidity, and air pressure.
Wind Speed and Direction Output
Lists UMB channels and ranges for wind speed and direction.
Precipitation Measurement Output
Lists channels for precipitation quantity and intensity.
Installation Guide
Sensor Mounting and Alignment
Details sensor mounting, fastening, and north alignment procedures.
Installation Location Considerations
Provides criteria for choosing an optimal installation site and general guidelines.
Connections and Interfaces
Supply Voltage and RS485 Interface
Specifies voltage requirements and describes the RS485 interface.
External Connections: ISOCON-UMB and Surge Protection
Illustrates ISOCON-UMB connection and surge protection use.
Commissioning Procedures
Site Checks and Basic Configuration
Verifies operation, configures altitude, alignment, and device IDs.
Configuration with UMB-Config-Tool
Factory Settings and Tool Basics
Lists default settings and guides on using the configuration tool.
General and Sensor Configuration Settings
Configures general device parameters and sensor-specific settings.
Pressure, Wind, and Compass Configuration
Configures settings related to pressure, wind, and compass.
Functional Testing Methods
Measurement Polling and Examples
Selects channels and shows examples for testing measurement polling.
Equipment Heating Modes
Heating Mode Descriptions
Explains Automatic, Off, and Mode 1 heating modes.
Eco-Mode 1 Heating Strategy
Details the energy-saving Eco-Mode 1 for heating.
Technical Specifications
Measuring Ranges, Accuracy, and Drawings
Lists ranges, accuracy, and references physical dimensions.
Detailed Accuracy Specifications
Provides specific accuracy details for temperature, humidity, pressure, and wind.
Disposal and Repair Information
Technical Support Contacts
Contact information and resources for technical assistance.
Appendix: Data and Communication Protocols
UMB Channel List Summary
Summarizes UMB channel assignments for data requests.
Binary Protocol Communication
Details binary protocol structure, addressing, and commands.
ASCII Protocol Communication
Details text-based ASCII communication, commands, and standardization.
SDI-12 Mode Communication
Details SDI-12 communication protocol, commands, and configuration.
Modbus Communication Integration
Modbus Communication Setup
Specifies Modbus RTU/ASCII settings like baud rate and supported functions.
Reading Modbus Input Registers
Explains reading input registers for measurement data.
Need help?
Do you have a question about the WS300-UMB and is the answer not in the manual?
Questions and answers