Related Manuals for HYOSUNG GT125R CATALOGUE
Summarization of Contents
BATTERY INITIAL CHARGING
BATTERY INSTALLATION
Procedure for installing the battery after initial charging.
IMPORTANT BREAK-IN INFORMATION FOR YOUR MOTORCYCLE
WARNING / CAUTION / NOTE
Explanation of signal words used to emphasize important information.
CONSUMER INFORMATION
SAFE RIDING RECOMMENDATION FOR MOTORCYCLE RIDERS
Essential precautions for safe motorcycle operation.
RIDING SAFETY AND PRECAUTIONS
STORAGE PRECAUTIONS
Instructions for storing the motorcycle for extended periods.
RIDING GEAR AND INSPECTION
Recommendations for helmet, apparel, and pre-ride checks.
RIDING PRACTICES
FAMILIARIZE YOURSELF WITH THE MOTORCYCLE
Advice on getting acquainted with the motorcycle's controls.
KNOW YOUR LIMITS
Guidance on understanding and respecting rider capabilities.
BAD WEATHER RIDING SAFETY
Precautions for riding in adverse weather conditions.
CONTROLS
IGNITION SWITCH AND KEY
Explanation of ignition switch positions, operation, and keys.
SUPPLY OF GASOLINE AND ENGINE OIL
GASOLINE
Safe practices for refueling the motorcycle's fuel tank.
SUPPLY OF GASOLINE AND ENGINE OIL
ENGINE OIL
Recommendations and checks for engine oil levels and quality.
RIDING TIPS
STARTING THE ENGINE
Steps and precautions for starting the motorcycle's engine.
RIDING TIPS
STARTING OFF
Guidance on how to begin riding after starting the engine.
RIDING TIPS
USING THE TRANSMISSION
Proper techniques for shifting gears.
RIDING TIPS
HILL CLIMBING AND PARKING
Techniques for hills and procedures for stopping and parking.
BREAK-IN PROCEDURES
THROTTLE, SPEED, AND ENGINE SPEED GUIDELINES
Throttle limits, speed, and engine speed variation during break-in.
BREAK-IN PROCEDURES
TIRE BREAK-IN AND FIRST SERVICE
Proper break-in for tires and importance of the 1,000 km service.
PERIODIC MAINTENANCE
LUBRICATION POINTS
Key points requiring lubrication for smooth operation.
INSPECTION AND MAINTENANCE
TOOL
List and description of tools included in the motorcycle kit.
INSPECTION AND MAINTENANCE
ENGINE OIL AND FUEL SYSTEM COMPONENTS
Inspection points for oil, fuel hose, gasoline, caps, and exhaust.
BATTERY
INSPECTION OF BATTERY SOLUTION LEVEL
Checking the battery fluid level (for applicable types).
BATTERY
CHECK AND CLEAN OF BATTERY TERMINAL
Procedure for cleaning battery terminals and connections.
AIR CLEANER
AIR CLEANER OIL DRAIN PLUG
Locating and servicing the air cleaner oil drain plug.
SPARK PLUG
IDLING SPEED ADJUSTMENT
How to adjust the engine's idle speed.
CLUTCH CABLE
CLUTCH CABLE PLAY ADJUSTMENT
Steps to adjust the clutch cable play for proper engagement.
DRIVE CHAIN
DRIVE CHAIN INSPECTION AND ADJUSTMENT
Checks for wear, damage, adjustment, and alignment.
DRIVE CHAIN
DRIVE CHAIN CLEANING AND OILING
Steps for cleaning and lubricating the drive chain.
BRAKES
BRAKE FLUID AND PADS
Checking and replenishing brake fluid and inspecting brake pads.
BRAKES
BRAKE DISK INSPECTION AND FLUID SUPPLY
Checking brake discs and refilling front brake fluid.
BRAKES
REAR BRAKE FLUID SUPPLY
Procedure for refilling rear brake fluid.
TIRE
TIRE PRESSURE
Correct tire pressure settings for solo and dual riding.
TIRE
TIRE CRACKS AND CUTS
Inspecting tires for visible cracks, cuts, and abnormal wear.
TIRE
TIRE TREAD CONDITION AND REPLACEMENT
Checking tread depth and steps for tire replacement.
REAR AXLE NUT
Inspection of the rear axle shaft and nut for loosening.
BULBS
INSPECTION OF LAMPS
Checking the function of all motorcycle lights.
HEAD LAMP BULB REPLACEMENT
Procedure for replacing the headlamp bulb.
TURN SIGNAL LAMP BULB REPLACEMENT
Procedure for replacing turn signal bulbs.
OTHER LAMP BULB REPLACEMENT
Replacing brake/tail and license plate lamp bulbs.
TROUBLESHOOTING
ENGINE STARTING PROBLEMS
Steps to troubleshoot engine starting issues.
TROUBLESHOOTING
IGNITION SYSTEM AND ENGINE STALLING
Checking ignition system and troubleshooting engine stalls.
TRANSPORT
DRAINING THE FUEL TANK
Procedure for safely emptying the fuel tank for transport.
CLEANING PROCEDURE
WASHING YOUR MOTORCYCLE
Detailed steps for washing the motorcycle by hand.
CLEANING PROCEDURE
WINDSHIELD CLEANING
Proper methods for cleaning the motorcycle's windshield.
CLEANING PROCEDURE
WAXING AND POST-CLEANING INSPECTION
Waxing paint and checking after cleaning.
STORAGE PROCEDURE
MOTORCYCLE, FUEL, AND BATTERY PREPARATION
Preparing motorcycle, fuel tank, and battery for storage.
STORAGE PROCEDURE
TIRE PREPARATION FOR STORAGE
Instructions for inflating tires before motorcycle storage.
SPECIFICATIONS
DIMENSIONS, ENGINE, AND TRANSMISSION SPECS
Physical, engine, and transmission specifications.
SPECIFICATIONS
CHASSIS, ELECTRICAL, AND CAPACITIES SPECS
Chassis, electrical, and fluid capacity specifications.
Need help?
Do you have a question about the GT125R CATALOGUE and is the answer not in the manual?
Questions and answers