Related Manuals for Ariens Sno-Thro ST1132LE
Summarization of Contents
SECTION 1: INTRODUCTION
The Manual
Explains how to use the manual for operation and maintenance.
Service and Replacement Parts
Instructions for ordering parts and identifying unit serial numbers.
Product Registration
Details about warranty registration card and its importance.
Delivery Information
Retailer's responsibilities upon unit delivery to the customer.
Disclaimer of Liability
Ariens' right to change products and liability limitations.
SECTION 2: SAFETY
Safety Alert Symbol and Signal Words
Explains the meaning and use of the safety alert symbol and signal words.
Practices, Laws, and Training
Emphasizes safe working precautions, local rules, and operator training.
Notations and Safety Decals
Explains manual notations and identifies safety decal locations.
UNIT SAFETY
Pre-Operation Checks and Safety
Inspection, clearances, work area, fall hazards, and slippery surfaces precautions.
Visibility, Guards, and Brakes
Ensuring good visibility, maintaining guards, and checking clutches/brakes.
Slope, Shutoff, and Vibration Safety
Precautions for slopes, safe shutdown, and handling abnormal vibrations.
Parking and Roll-Away Safety
Guidelines for parking the unit and preventing roll-away.
PERSONAL SAFETY
Operator Responsibility and Impairment
Operator training, no drugs/alcohol for safe operation.
Safe Distances
Emphasizes keeping children and people away during operation.
OPERATIONAL SAFETY
Rules, Child Safety, and Pre-Start
Understanding controls, child safety, and pre-start procedures.
Speed, Attachment, and Temperature
Managing speed ranges, attachment power, and ambient temperature.
Riders, Reverse, and Tip Over Avoidance
Prohibits passengers, advises slow backing, and tip over avoidance.
Gear and Hazard Precautions
Safety gear, sharp edges, rotating parts, pinch points, hot surfaces, and entanglement.
Thrown Objects and Ventilation
Hazards from thrown objects, exhaust fumes, and ventilation needs.
MAINTENANCE AND SERVICE SAFETY
Unit Preparation and Service Position
Steps before maintenance and how to position the unit.
Fuel Safety and Storage
Precautions for explosive fuel and guidelines for unit storage.
Parts, Hardware, Cleaning, and Transport
Importance of parts, hardware, cleaning, and transport safety.
ATTACHMENTS AND ACCESSORIES
Attachment Usage and Accessories
Guidance on using approved attachments and available accessories.
SECTION 3: ASSEMBLY
Unpacking and Assembly Checklist
Instructions for unpacking the unit and a checklist for assembly steps.
Connecting Controls and Checks
Connecting speed selector, clutches, checking interlock, tires, and auger oil.
Filling Engine Fluids
Instructions for filling the engine crankcase with oil and fuel.
Final Control Check
Ensuring all unit controls operate properly before use.
SECTION 4: OPERATION
Controls and Features Overview
Overview of the unit's controls and their locations.
Clutch and Interlock Operation
Explains dual handle interlock and clutch operation.
Ignition, Primer, and Choke Controls
Operation of ignition switch, primer bulb, and choke control.
Throttle and Speed Selector
How to adjust engine speed and select travel speed.
Starter, Chute, and Deflector Controls
Using starter, discharge chute, and deflector controls.
Differential Lock, Runners, and Headlight
Operation of differential lock, runners, and headlight.
Pre-Start, Fuel, and Oil Checks
Pre-start checks, fuel safety, and engine oil checks.
Clutch/Brake Checks and Starting Procedures
Checking clutches/brakes and procedures for electric/manual start.
Throwing Snow and Travel
Safely throwing snow, snow throwing tips, and traveling between areas.
TRANSPORT Procedures
Safety guidelines for transporting the unit on a truck or trailer.
SECTION 5: GENERAL MAINTENANCE
Unit Preparation and Service Position
Steps before maintenance and how to position the unit.
Fuel Safety and Filling
Precautions for explosive fuel and instructions for filling the fuel tank.
Fuel Valve and Engine Cooling
Proper use of the fuel shut-off valve and engine cooling maintenance.
Engine Oil Checks and Changes
Procedures for checking and changing engine oil.
Drive Belt Maintenance
Warning and procedure for traction and attachment drive belt maintenance.
Shear Bolts and Tire Pressure
Shear bolt replacement and tire pressure maintenance.
Friction Wheel and Auger Gearcase
Friction wheel service and auger gearcase lubrication.
Lubrication and Adjustments Overview
Identifying lubrication points and general adjustments.
Chute, Remote, Runners, and Blade Adjustments
Adjusting discharge chute, remote deflector, runners, and scraper blade.
Clutch and Chain Adjustments
Adjusting traction clutch, speed selector, and drive chain.
CLEANING AND STORAGE
Unit Cleaning, Lubrication, and Storage
How to clean, lubricate, and store the unit.
Engine Storage and Optional Parts
Engine storage procedures and information on attachments/accessories.
MAINTENANCE SCHEDULE
Maintenance Schedule Overview
Chart showing recommended maintenance tasks and intervals.
TROUBLE SHOOTING
Engine and Operation Troubleshooting
Common engine and unit operation problems and their probable causes.
SNO-THRO SPECIFICATIONS
Model Specifications
Detailed specifications for various Sno-Thro models.
5 Year Limited Warranty
Protection Plan and Usage Requirements
Warranty protection plan details and duration based on usage.
Purchaser Responsibilities and Registration
Purchaser duties, product registration, and components warranty.
Service, Parts, and Battery Warranty
Warranty for service, parts, accessories, and prorated battery coverage.
Warranty Exclusions and Limitations
List of warranty exclusions and limitations on liability for damages.
Need help?
Do you have a question about the Sno-Thro ST1132LE and is the answer not in the manual?
Questions and answers