US Robotics 005686-02 Installation Manual page 2

Pr Pr Pr Pr Prepar epar epar epare for inst e for inst e for installation. e for inst
epar e for inst
Write the modem's serial number in the box below.
The serial number is located on the white bar code
sticker on the underside of the modem and on the
modem's box.
Shut down Windows and turn off your computer.
Connect the modem to the Conne Conne ct the modem to the ct the modem to the ct the modem to the
Conne Conne ct the modem to the
computer. computer.
computer. computer. computer.
Connect one end of the RS-232 serial cable (not
included) to the modem and the other to your
computer's serial port.
NOTE: NOTE: NOTE: When looking for the serial port label on the
NOTE: NOTE:
back of your computer, look for COM, MODEM, RS-
232, 10101, or SERIAL. Do not use AUX, GAME, LPT,
or PARALLEL.
allation. allation. allation.
allation.
4
Plug in the modem's powe Plug in the modem's pow
Plug in the modem's powe Plug in the modem's pow Plug in the modem's pow
Plug the power supply into the modem's pow
(labeled on the modem's underside) an
an electrical outlet. Turn on the modem. T
light should illuminate.
NOTE: NOTE: NOTE: If the CS light does not illuminate or other lig
NOTE: NOTE:
illuminate, make sure that only DIP switches 3, 5, an
are in the down position. (The DIP switches are loca
next to the phone jacks on the back of the modem.) Y
may also be using the wrong serial cable or the wro
power supply. See the "Before You Begin" section at
beginning of this Installation Guide for more informat
Install the modem driver Inst Inst all the modem driver all the modem driver all the modem driver
Inst Inst all the modem driver
5
Turn on your computer. When your desktop re
insert the Connections CD into your CD-ROM
If you see a "New Hardware Found" screen If you see a "New Hardware Found" screen If you see a "New Hardware Found" screen
If you see a "New Hardware Found" screen If you see a "New Hardware Found" screen
supply. supply. supply.
supply. supply.