Denon 685 Operating Instructions Manual page 46

ENGLISH
5
Set the surround parameter according to the source.
(Main unit)
(Remote control unit)
6
Set the various surround parameters.
• CINEMA EQ setting
• D. COMP. setting
OFF
NOTE:
This parameter is displayed during DOLBY DIGITAL playback.
• LFE setting
-10dB
7
(Remote control unit)
NOTE:
• When making parameter settings, the display will return to the regular condition several seconds after the last button was pressed and
the setting will be completed.
46
• The parameter switches as shown below each time the button is pressed.
If you do want the bass and trable to be adjusted, turn off the tone defeat mode.
NOTE:
Please make sure the "AUDIO" position of the slide switch on the remote control unit.
CINEMA EQ OFF
ON OFF
or or
D.COMP. OFF
LOW MID
or or
LFE 0dB
-5dB 0dB
or or
Press the ENTER button to finish surround parameter mode.
CINEMA EQ
D.COMP.
LFE
TONE DEFEAT
SURROUND BACK
DEFAULT
• TONE DEFEAT setting
• SURROUND BACK SPEAKER setting
HIGH MTRX ON
NOTE:
This parameter is displayed during DOLBY DIGITAL playback.
• DEFAULT setting
Select "Yes" to reset to the factory defaults.
TONE DEF. ON
ON OFF
or or
SB : MTRX ON
NON MTRX
or or
DEFAULT Y/N
YES NO
or or
OFF