Denon 685 Operating Instructions Manual page 44

ENGLISH
7
Set the various surround parameters.
• CINEMA EQ setting
ON
• CENTER IMAGE setting
0.0
• TONE DEFEAT setting
ON
• SURROUND BACK SPEAKER setting
ON
• D. COMP. setting
OFF
NOTE:
This parameter is displayed during DOLBY DIGITAL playback.
• LFE setting
-10dB
NOTE:
This parameter is displayed during DOLBY DIGITAL playback.
• DEFAULT setting
YES
Select "Yes" to reset to the factory defaults.
44
CINEMA EQ OFF
OFF
or or
C.IMAGE 0.3
0.3 1.0
or or
TONE DEF. ON
OFF
or or
SB : ON
OFF
or or
D.COMP. OFF
LOW MID
or or
LFE 0dB
-5dB 0dB
or or
DEFAULT Y/N
Y/N NO
or or
8
Press the ENTER button to finish surround parameter mode.
NOTE:
• When making parameter settings, the display will return to the
regular condition several seconds after the last button was
pressed and the setting will be completed.
Surround parameters q
Pro Logic II
• The Cinema mode is for use with stereo television shows and
all programs encoded in Dolby Surround.
• The Music mode is recommended as the standard mode for
auto sound music systems (no video), and is optional for A/V
systems.
• The Pro Logic mode offers the same robust surround
processing as original Pro Logic in case the source contents is
not of optimum quality.
• The Game mode for playing games.The game mode can only be
used with 2-channel audio sources.
Select one of the modes ("Cinema", "Music", "Pro Logic"or
"Game").
Panorama Control:
This mode extends the front stereo image to include the
surround speakers for an exciting "wraparound" effect with
side wall imaging.
Select "OFF" or "ON".
Dimension Control:
This control gradually adjust the soundfield either towards the
HIGH front or towards the rear.
The control can be set in 7 steps from 0 to 6.
Center Width Control:
This control adjust the center image so it may be heard only
from the center speaker; only from the left/right speakers as a
phantom image; or from all three front speakers to varying
degrees.
The control can be set in 8 steps from 0 to 7.
DTS NEO:6 Mode:
• Cinema
This mode is optimum for playing movies.
performed with emphasis on separation performance to
achieve the same atmosphere with 2-channel sources as with
6.1-channel sources.
This mode is effective for playing sources recorded in
conventional surround formats as well, because the in-phase
component is assigned mainly to the center channel (C) and the
reversed phase component to the surround (SL, SR and SB
channels).
• Music
This mode is suited mainly for playing music. The front channel
(FL and FR) signals bypass the decoder and are played directly
so there is no loss of sound quality, and the effect of the
surround signals output from the center (C) and surround (SL,
SR and SB) channels add a natural sense of expansion to the
sound field.
CENTER IMAGE (0.0 to 1.0: default 0.3):
The center image parameter for adjusting the expansion of the
center channel in the DTS NEO:6 MUSIC mode has been added.
(Remote control unit)
x and Pro Logic II Mode:
Decoding is