Related Manuals for AKO AKO-D14610
Summarization of Contents
Introduction to AKO Darwin Controllers
AKO Darwin Controller Model Overview
Details the range of AKO thermometers, thermostats, and controllers available.
Thermometer and Thermostat Variants
Describes specific features of thermometer and thermostat models.
AKO Controller Model Types
Outlines controller models based on relay count and functionality.
Device Description and User Interface
Keypad and Display Operation
Explains the operation of buttons and the controller's display interface.
Understanding Display Messages
Lists and explains all possible messages shown on the controller's screen.
Model Versions, Maintenance, and Safety
Covers product identification, cleaning, and general safety precautions.
Initial Setup and Configuration Procedures
Guided Setup Wizard
Step-by-step guide for initial controller configuration based on application type.
Basic Operational Settings Configuration
Configuration of inputs, probe types, display modes, and operation modes.
Digital Input, Password, and Delay Settings
Setting up digital inputs, polarity, access codes, and system delays.
Operational Modes and System Functions
Compressor Control Modes
Details on normal cooling, heating, and fast freezing modes for compressor operation.
Energy-Saving ECO Mode
Explanation of the energy-saving mode activated by inactivity or external input.
Compressor Protection Delay Settings
Settings for delays to protect the compressor from short cycling and damage.
Defrost Cycle Management and Configuration
Configuration of defrost start, type (resistors/heatpump), and drip time.
Fan Control and Operation
Parameters controlling fan operation based on temperature and defrost status.
Light Control Feature
How to activate and manage the cold room light feature.
Pump Down Functionality
Procedure to isolate refrigerant and protect the compressor during cycles.
Alarm Monitoring and Notification
Management of temperature, external, defrost, and door open alarms.
Wiring and Connectivity
General Wiring Principles and Diagrams
Guidelines for probe and cable installation and general wiring diagrams.
Model-Specific Wiring Schematics
Visual schematics for connecting Thermometers, Thermostats, and Controllers.
Connectivity and RS485 Modbus Networking
Details on RS485 Modbus communication for remote monitoring and control.
Parameter Setup and Reference
Accessing the Programming Menu
Steps to enter and navigate the controller's programming interface.
Adjusting Set Points and Operating Parameters
Guide to changing set points and various operational parameters.
Parameter Categories: Regulation, Defrost, Fan, Alarm
Detailed breakdown of parameters for temperature, defrost, fan, and alarm control.
General Status and Input Parameter Reference
Reference for parameters related to operation type, digital inputs, and security.
Technical Specifications
Electrical and Communication Specifications
Details on power supply, voltage, current, and communication interfaces.
Relay, Probe, and Environmental Specifications
Information on relay ratings, probe types, operating conditions, and IP rating.
Dimensional and Installation Data
Physical size, mounting considerations, and terminal connection details.
System Accessories
AKO-D14918 Programming Key
Description of the accessory for easily copying controller configuration settings.
Need help?
Do you have a question about the AKO-D14610 and is the answer not in the manual?
Questions and answers