Related Manuals for Regal Raptor DAYTONA 350
Summarization of Contents
Motorcycle Safety
Safe Riding Rules
Essential guidelines for safe motorcycle operation and rider awareness.
Protective Apparel
Recommended safety gear for riders and passengers to prevent injuries.
Modifications
Warnings and guidelines regarding unauthorized changes to the motorcycle.
Loading
Instructions for proper weight distribution and cargo handling for stability.
Accessories
Information on the selection, installation, and use of optional accessories.
Parts Function
Instruments and Indicators
Identification and function of dashboard instruments and warning lights.
Ignition Switch Operation
Procedure for operating the key ignition switch for starting and securing the motorcycle.
Left Handlebar Controls
Horn Button
Operation of the horn for signaling.
Turn Signal Switch
Function of the turn signal switch for indicating direction changes.
Passing Switch
Use of the passing switch for flashing high beams.
Headlight Dimmer Switch
Control for selecting low and high beam headlights.
Right Handlebar Controls
Electric Starter Button
Button used to start the engine electrically.
Headlight Switch
Control for turning headlights on and off, and selecting light modes.
Engine Cut-off Switch
Switch to immediately stop the engine in emergencies.
Engine Oil
Tubeless Tyres
Information on proper tyre pressure for stability and longevity.
Operation
Pre-Ride Inspection
Checklist of essential checks before riding to ensure safety and prevent issues.
Starting the Engine
Step-by-step guide for starting the motorcycle engine safely.
Riding
Shifting Gears
Procedure for shifting gears smoothly while riding.
Running-in Procedure
Guidelines for the initial 1000km break-in period to ensure engine longevity.
Braking System
Braking Techniques
Safe methods for slowing down, stopping, and emergency braking.
Maintenance
Engine Oil Lever Check
Daily procedure for checking the engine oil level and potential leaks.
Engine Oil Change and Filter Clean
Steps for draining old oil, cleaning the filter, and refilling with new oil.
Spark Plug Service
Spark Plug Selection
Guidance on choosing the correct spark plug based on riding conditions.
Spark Plug Inspection and Replacement
Procedure for inspecting, cleaning, and replacing spark plugs.
Throttle and Carburetor Adjustment
Throttle Cable Inspection
Checking throttle cable for smooth operation and proper free play.
Carburetor Idle Speed Adjustment
Procedure for adjusting the engine's idle speed via the carburetor.
Drive Chain Service
Drive Chain Check and Adjustment
Inspecting and adjusting drive chain wear and tension.
Drive Chain Lubrication
Process for lubricating the drive chain for smooth operation.
Front Disc Brake System
Front Brake Fluid Management
Checking and maintaining front brake fluid levels and properties.
Front Brake Disc and System Checks
Inspecting front brake disc wear and performing pre-ride system checks.
Rear Disc Brake System
Rear Brake Fluid Management
Checking and maintaining rear brake fluid levels and properties.
Rear Brake Disc and System Checks
Inspecting rear brake disc wear and performing pre-ride system checks.
Wheel Service
Front Wheel Service
Procedures for disassembling and replacing the front wheel.
Rear Wheel Service
Procedures for disassembling and replacing the rear wheel.
Accumulator Maintenance
Battery Precautions
Important warnings and precautions for handling and maintaining the motorcycle battery.
Cooling System Service
Coolant Information and Filling
Properties of coolant and procedure for filling the system.
Coolant Replacement and System Checks
Procedures for replacing coolant and routine system maintenance.
Fuse Replacement
Fuse Replacement Safety
Safety precautions for replacing fuses to prevent electrical issues.
Cleaning and Storage
Motorcycle Cleaning
Guidelines for cleaning the motorcycle, including precautions.
Storage Guide
Steps for preparing the motorcycle for extended storage.
Removal from Storage and Initial Maintenance
Removal from Storage
Steps for taking the motorcycle out of storage and initial checks.
Initial Maintenance Checks
Routine cleaning, lubrication, and checks after storage.
Motorcycle Specifications
DD125E-5C Specifications
Technical details and parameters for the DD125E-5C model.
DD350E-6C Specifications
Technical details and parameters for the DD350E-6C model.
Need help?
Do you have a question about the DAYTONA 350 and is the answer not in the manual?
Questions and answers