Advertisement
Quick Links
Operating
IT5000-C / IT6000-C
Manual
3/8" IT Tool
IT5000-C / IT6000-C
®
3/8" BAND-IT
Pneumatic IT Tools
Patent Pending
BAND-IT-IDEX, Inc.
Document # P48850 Rev. C
A Unit of IDEX Corporation
© Copyright
www.BAND-IT-IDEX.com
4799 Dahlia Street
BAND-IT-IDEX, Inc. 2015
Denver, CO 80216-3070 USA
All rights reserved
P: 1-800-525-0758
Page 1 of 36
F: 1-800-624-3925
Advertisement
Related Manuals for Band-it IT6000-C
Summarization of Contents
Safety Guidelines
Additional Safety Guidelines
Provides essential safety advice beyond general warnings for tool operation and environment.
Tool Overview
Model Identification
Explains the coding system for identifying different IT tool models and configurations.
Air System Settings
Initial Setup – Pneumatic Settings
Details the initial connection and pressurization steps for the pneumatic system.
Setting the Tool Air Pressure
Guides on adjusting air pressure for optimal clamp tension and tool performance.
Dimple Clip Guide (IT6000)
Installing the Dimple Clip
Instructions for correctly installing the dimple clip for visual tie installation feedback.
Adjustable Support Arm and Handle
Tool Ergonomics
Discusses tool weight and recommended wrist positioning for operator comfort and efficiency.
Fixture Hanger and Support
Support Boom and Balancer
Recommends using weight balancers or fixtures for tool support and maneuverability.
Fixture Mounting Options
Fixture Guide for Tie-Lok® Ties
Describes the fixture guide design for proper tie threading and buckle passage.
Remote Actuation Configuration
Remote Trigger: 2-Way Valve
Details the setup for remote tool operation using a 2-way valve system.
Remote Trigger: 3-Way Valve
Outlines the configuration for remote tool operation with a 3-way valve system.
Multiple Triggers
Explains how to connect multiple trigger devices in series for remote actuation.
Maintenance: Tension Block
Disassembly and Inspection
Steps for disassembling and inspecting the tension block and related components.
Reassembly Procedures
Procedures for cleaning, lubricating, and reassembling the tension block assembly.
Maintenance: Cutter Blade
Removal and Installation
Instructions for removing and reinstalling the cutter blade for inspection or replacement.
Need help?
Do you have a question about the IT6000-C and is the answer not in the manual?
Questions and answers