Related Manuals for Knuth KKS 350
Summarization of Contents
Installation Guide
Connections
Connect the machine to the power supply, ensuring proper grounding and protection.
Control Handgrip & Initial Setup
Attach control handgrip, bar-stop rod, bar holding roll, and fill cooling liquid.
Machine Operation and Use
Control Devices Overview
Explains control buttons, speed commutator for machine operation.
Normal Cutting Procedure
Step-by-step guide for standard cutting operations and cutting capacity.
Stopping the Machine
Methods to stop blade rotation and the machine during or after operation.
Miter Cut Execution
Instructions for setting up and executing angled cuts up to 45 degrees.
Vice Unit Operation
Using the quick clamping vice and its shifting mechanism for material holding.
Pneumatic Vice Operation (Optional)
Instructions for operating the optional pedal-controlled pneumatic vice.
Head Side Shifting
Procedure for shifting the head unit sideways for specific cutting tasks.
Clutch Unit Adjustment
Guidance on adjusting the clutch unit to compensate for wear and tear.
Screw Gearing Adjustment
How to adjust screw gearing to reduce noise and vibrations.
Cutting Blade Replacement
Step-by-step instructions for safely replacing the cutting blade.
Maintenance and Care
Reduction Unit Oil Change
Procedure for changing reduction unit oil after initial hours and annually.
Electric System Components
Overview of the machine's 24V low tension electric system components.
Wiring Diagram
Schematic of the machine's electrical connections and components.
Machine Parts
Head Assembly Parts
Diagram and list of parts for the machine's head assembly.
Base Assembly Parts
Diagram and list of parts for the machine's base assembly.
Need help?
Do you have a question about the KKS 350 and is the answer not in the manual?
Questions and answers