Advertisement
Advertisement
Table of Contents
Related Manuals for Genius HD-530
Summary of Contents for Genius HD-530
- Page 1 HD-527 HD-530 Digital Camcorder...
-
Page 2: Before Using The Camcorder
Before using the Camcorder Thank you for selecting digital camcorder of high quality and resolution as manufactured by our company. Press the power switch to turn on or off the camcorder. Some basic settings must be performed prior to use of this camcorder. Setting the format of date and time 1) Rotate the Mode knob to switch to the Setup mode. -
Page 3: Shooting Video
Take out batteries Operate according to the procedures shown in Figure 6 to remove batteries properly as per procedures as shown in Figure 6; push to open the battery pack, and remove batteries from the battery slot. Charging batteries You can use the attached charger to charge batteries as per the following procedures. 1) Connect the switch power to the camcorder in the mode as shown in the diagram. - Page 4 Note: In the mode of Shooting (image capture), Press Down button to adjust resolution (QVGA, VGA, HD); Shooting mode Description to icons under the shooting mode: Indicator for shooting status: Indicator for resolution; Indicator for close/far shooting; Indicator for remaining time of recording; Scene;...
- Page 5 Shoot video playback mode Indicator for playback mode; Indicator for type of video file playback; Total number of file; Total time period of file; File playback progress bar; Indicator for fast forward and fast rewind of file Indicator for file pause or playback; Sound recording mode 00:00:43 1) Switch on the power supply of the camcorder,...
-
Page 6: Taking Photos
Recording playback 1) Turn the Mode knob to switch to the Recording playback Mode, and the latest files will be displayed on the LCD screen; 2) Press the Up button to enter the Nine-picture mode, and press the Up/Down button and Left/Right button to select required files. -
Page 7: Photo Playback
Photo playback 1) Turn the Mode knob to switch to the Photo playback mode, and the latest files will be displayed on the LCD screen; 2) Press the Up button to enter the Nine-picture mode, and press the Up/Down button and Left/ Right button to select required files. - Page 8 10. Battery pack; 16. LED fill light button; 22. HDMI output interface; 11. Tripod hole; 17. Left button; 23. Headset output interface (optional); 12. Switch of lens cover; 18. Up button; 24. USB output interface; 13. Power button; 19. Right button; 25.
- Page 9 Button Designation Function It is set as off by the system. Press the button to switch on the fill light, and Light button press the button again to switch off the fill light. In the mode of Shooting , Recording,Taking photo, it is set as common OSD on by the system, and press the button to switch of the common OSD, and press the button again to switch off the backlight and power of the LCD screen, and then finally press the button to switch on the common OSD;...
- Page 10 Button Designation Function In the mode of Shooting, the button is invalid; In the Photograph mode (image capture), the button is invalid; Enter button In the mode of MP3 Playback (browsing MP3), press the button to play MP3 ; In the mode of MP3 Playback (during playback), the button is invalid;...
- Page 11 Button Designation Function In the mode of Shooting,Recording, Taking photo, this button is invalid; In the mode of File Playback (browsing video), press the button to switch to the Left button previous file; In the mode of File Playback (during video playback), press the button for fast rewind;...
- Page 12 Button Designation Function In the modes of Video Playback,Voice Playback Playback, Photo Playback and File Playback, press the button to open the menu function, and press the Menu button button again to close the menu; Shooting button In the Photograph mode, press the button half to focus, and then press the button fully to take a photo;...
-
Page 13: Connecting To A Computer
Connecting to a computer Use attached USB cable to connect the camcorder to the computer as shown in the figure. Connecting to a CVBS TV port Use attached AV cable to connect the camcorder to the standard TV set as shown in the figure. HDMI Output Connect the camcorder to a HD TV as shown with the HDMI cable Note: One end of the HDMI cable must be A-type interface, and the other end must be C-type interface. -
Page 14: Specification
QVGA;VGA;720P Image resolution JPG format;VGA/1.3M/3M/5M/8M/12M Static image Zoom 8X digital zooming L T P S screen HD-527 is 2.7”;HD-530 is3” Flash Effective range:1M~1.5M Automatic; landscape; night; portrait; night portrait; beach; movement; banquet Scene +2.0EV/+1.5EV/+1.0EV/0EV/-1.0EV/-1.5EV/-2.0EV White balance Auto, Sunny, Cloudy, Tungsten light, Fluorescent lamp...
Need help?
Do you have a question about the HD-530 and is the answer not in the manual?
Questions and answers